|
|
| (13 intermediate revisions by the same user not shown) |
| Line 1: |
Line 1: |
| − | ==Mini2440 | S3C2440 ARM9 Board==
| + | *[[About Mini2440 Development Board]] |
| − | FriendlyARM Mini 2440 SBC (Single-Board Computer) with 400 MHz Samsung S3C2440 ARM9 processor. The board measures 100 x 100 mm, ideal for learning about ARM9 systems.
| + | *[[Mini2440‘s settings and connections]] |
| − | | + | *[[The function and usage of BIOS in Mini2440]] |
| − | [[http://www.friendlyarm.net/downloads#schematics Mini2440 Schematics]] | + | *[[How to install WinCE]] |
| − | | + | *[[How to install Linux]] |
| − | ==Specification==
| + | *[[LCD A70 for FriendlyArm 6410&2440 ]] |
| − | *Dimension: 100 x 100 mm | |
| − | *CPU: 400 MHz Samsung S3C2440A ARM920T (max freq. 533 MHz)
| |
| − | *RAM: 64 MB SDRAM, 32 bit Bus
| |
| − | *Flash: 64 MB / 128 MB / 256 MB / 1GB NAND Flash and 2 MB NOR Flash with BIOS
| |
| − | *EEPROM: 256 Byte (I2C) | |
| − | *Ext. Memory: SD-Card socket | |
| − | *Serial Ports: 1x DB9 connector (RS232), total: 3x serial port connectors
| |
| − | *USB: 1x USB-A Host 1.1, 1x USB-B Device 1.1
| |
| − | *Audio Output: 3.5 mm stereo jack
| |
| − | *Audio Input: Connector + Condenser microphone
| |
| − | *Ethernet: RJ-45 10/100M (DM9000)
| |
| − | *RTC: Real Time Clock with battery
| |
| − | *Beeper: PWM buzzer
| |
| − | *Camera: 20 pin (2.0 mm) Camera interface
| |
| − | *LCD Interface: 41 pin (1.0 mm) connector for FriendlyARM Displays and VGA Board | |
| − | *Touch Panel: 4 wire resistive
| |
| − | *User Inputs: 6x push buttons and 1x A/D pot
| |
| − | *User Outputs: 4x LEDs
| |
| − | *Expansion: 40 pin System Bus, 34 pin GPIO, 10 pin Buttons (2.0 mm)
| |
| − | *Debug: 10 pin JTAG (2.0 mm)
| |
| − | *Power: regulated 5V (DC-Plug: 1.35mm inner x 3.5mm outer diameter)
| |
| − | *Power Consumption: Mini2440: 0.3 A, Mini2440 + 3.5" LCD: 0.6 A, Mini2440 + 7" LCD: 1 A
| |
| − | *OS Support
| |
| − | *Windows CE 5 and 6
| |
| − | *Linux 2.6
| |
| − | *Android
| |
| − | | |
| − | ==Board==
| |
