|
|
(11 intermediate revisions by the same user not shown) |
Line 1: |
Line 1: |
− | ==Tiny6410 | S3C6410 ARM11 Stamp Module==
| + | *[[Tiny6410 Development Board Overview]] |
− | FriendlyARM Tiny 6410 Stamp Module with 533 MHz Samsung S3C6410 ARM11 processor.
| + | *[[Tiny6410 Hardware Specification]] |
− | | + | *[[Burnning BIOS into Tiny6410]] |
− | [http://www.friendlyarm.net/downloads#schematics Tiny6410 Schematics ] | + | *[[Installing system in Tiny6410]] |
− | | + | *[[Runnig system with SD card]] |
− | ==Specification: Stamp Module==
| + | *[[LCD A70 for FriendlyArm 6410&2440 ]] |
− | *Dimension: 64 x 50 mm | |
− | *CPU: 533 MHz Samsung S3C6410A ARM1176JZF-S with VFP-Unit and Jazelle (max freq. 667 MHz)
| |
− | *RAM: 128 MB / 256 MB DDR RAM, 32 bit Bus
| |
− | *Flash: 256 MB / 1GB NAND Flash
| |
− | *Serial, SPI, USB, LCD, CMOS Camera *Analog Input and Output
| |
− | *User Outputs: 4x LEDs
| |
− | *Expansion headers (2.0 mm)
| |
− | *Debug: 10 pin JTAG (2.0 mm)
| |
− | *OS Support
| |
− | **Windows CE 6
| |
− | **Linux 2.6
| |
− | **Android
| |
− | **Ubuntu
| |
− | | |
− | ==Specification: SDK-Board==
| |
− | *Dimension: 180 x 130 mm | |
− | *EEPROM: 1024 Byte (I2C) | |
− | *Ext. Memory: SD-Card socket
| |
− | *Serial Ports: 4x DB9 (RS232) | |
− | *IR: Infrared Receiver
| |
− | *USB: 1x USB-A Host 1.1, 1x miniUSB Slave 2.0
| |
− | *Audio Output: 3.5 mm stereo jack
| |
− | *Audio Input: 3.5mm jack
| |
− | *Ethernet: RJ-45 10/100M (DM9000)
| |
− | *RTC: Real Time Clock with battery
| |
− | *Beeper: PWM buzzer
| |
− | *TV Output: CVBS
| |
− | *LCD: 40 pin (2.0 mm) and 41 pin connector for FriendlyARM Displays and VGA Board
| |
− | *Touch Panel: 4 pin (resistive)
| |
− | *User Inputs: 8x buttons and 1x A/D pot
| |
− | *Expansion headers (2.0 mm)
| |
− | *Power: regulated 5V (DC-Plug: 1.35mm inner x 3.5mm outer diameter)
| |
− | | |
− | ==Stamp Module==
| |
− | [[File:Tiny6410_1.jpg]] | |
− | [[File:Tiny6410_2.jpg]] | |
− | | |
− | ==DK-Board + Stamp Module==
| |