Geeetech Mizar S 3D Printer
From Geeetech Wiki
Revision as of 02:27, 4 January 2023 by Admin (talk | contribs) (→How to replace a hotend and a nozzle)
Contents
Introduction
Product details
Unpacking and proper handling
Slicing
Printer maintenance
How to replace a hotend
| Tools necessary for this guide |
|---|
| Wrench size 10 mm
Allen keys – 1.5/2/2.5/3 mm Flat screwdriver tip width 2.5 mm Diagonal pliers Electrical tape Zip ties Craft knife or equivalent |
How to replace a hotend and a nozzle
| Tools necessary for this guide |
|---|
| Example |
