Melzi V2.0

Introduction

Melzi V2.0 is a compact all-in-one control board which supports only one extruder. Its plug-and-play capability contributes to less time consuming for development and installation. Melzi V2.0 is a quiet mature product with good stability. Melzi 2.0 is based on Arduino Leonardo, so it is more accurate in temperature detection. MelziV2.0 has the following amelioration compared with V1.0: the MOSFET of heatbed and extruder have better capacity of heat dissipation; SD slot adopts outer lead bonding, improving the stability of reading and writing, protecting sd car from damage. When connected to PC, the LED will give prompts for users to know the connection.

Features: 1. Operating voltage: 12v

2. Main control IC: ATMEGA1284P from ATMEL

3. FT232RL USB interface

4.4 integrated A4988 stepper motor driver

5.MK1、MK2a、MK2b、MK3 controllable hotbed MK1、MK2a、MK2b、MK3

6. Mini SD card slot that integrates G code files.

7. The integration of 3 MOSFET driver amphenol connectors for hotbed, fan and extruder.

Interfaces

Overview and Hardware Resources

Size ：210mm *50mm Weight：70g

Software Resources

Compiling environment: Arduino IDE http://www.geeetech.com/wiki/images/3/36/Arduino-1.0.5-r2-windows.zip

Firmware: Marlin http://www.geeetech.com/wiki/images/3/39/Marlin-Marlin_v1.zip

Pc software:

printrun http://www.geeetech.com/wiki/images/e/e1/Printrun-Win-Slic3r-10Mar2014.zip

Repetier-Host http://www.geeetech.com/wiki/images/3/36/SetupRepetierHost_1_00.zip

Interface specifications

1 ADC interfaces for thermometry: one for extruder and another for hotbed. 2 PWM to control extruder, hotbed and fan. 3 end stops for x/y/z axis (mechanical)