Opto-isolator Breakout

introduction

This is a board designed for opto-isolation. This board is helpful for connecting digital systems (like a 5V microcontroller) to a high-voltage or noisy system.

This board electrically isolates a controller from the high-power system by use of an opto-isolator IC. This IC has two LEDs and two photodiodes built-in.

This allows the low-voltage side to control a high voltage side.

Features

• Two channel coupler
• SOIC-8 surface mountable package
• Standard lead spacing of 0.05"
• Available only on tape and reel option(conforms to EIA standard 481-2)
• Isolation test voltage, 4000 VRMS
• Compatible with dual wave, vapor phase andIR reflow soldering
• Lead (Pb)-free component
• Component in accordance to RoHS 2002/95/EC andWEEE 2002/96/EC