Arduino buzzer Module

From Geeetech Wiki
Revision as of 05:55, 10 May 2012 by Admin (talk | contribs) (Pin Definition)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Introduction

BUZZER1.jpg

This is the Arduino Buzzer Module. Through the Arduino or other controllers, this module will be able to control the buzzer sounds or MID music easily. It is extended with the Arduino board sensors used in combination, to achieve the control of an interactive sound and light works.

Specification

Pin Definition

BUZZER11.jpg

Usage

Buzzer usage.jpg

VCC - 5V
GND - GND
S - Digital pin2

Example code

int buzzPin =  2;    //Connect Buzzer on Digital Pin3 
void setup()   
 {         
 pinMode(buzzPin, OUTPUT);      
} 
 void loop()                      
{ 
 digitalWrite(buzzPin, HIGH); 
 delayMicroseconds(50); 
 digitalWrite(buzzPin, LOW);  
 delayMicroseconds(50);    
}

How to buy it

Click here to buy Arduino buzzer module