Geeetech Alkaid 3D Printer

From Geeetech Wiki
Revision as of 10:13, 21 July 2023 by Admin (talk | contribs) (Trouble Shooting)

Jump to: navigation, search

Printer Introduction

Alkaid is made in black and white with 6.08 "2K resolution, enabling X/Y accuracy up to 0.05mm. Alkaid's z axis uses a high-cost linear guide rail, which has the characteristics of high rigidity, high load, automatic self-aligning, absorbing assembly errors, etc., which can effectively improve the overall printing quality of 3D printers. A new generation of matrix light source, using 15 pieces of high-light power quartz lamp beads, with professional optical materials made of matrix lenses, so that ultraviolet irradiation on the LCD screen more uniform, higher intensity, effectively improve the printing speed and accuracy.

The rugged Alkaid innovates by integrating UV lamp beads on the aluminum substrate at the bottom of the machine, allowing for greater heat dissipation area. With the cooling fan, it can effectively reduce the temperature of the lamp board and extend the service life of the UV lamp beads. Alkaid is easy to operate and affordable, making it ideal for beginners and amateurs. In addition, geeetech is able to provide ODM and OEM custom design and manufacturing.


Main Specification

Printing Technology LCD Light Curing Surface Forming Technology

Printing Size 82X130X190 mm

XY Resolution 0.051 mm

LCD Size 6.08 inch

LCD Resolution 2560X1620 Pixels

Z-axis Precision 0.001 mm

Layer Thickness 0.01~0.2 mm

Printing Speed 30 mm/h

UV Lamp Rated Power 45 W

Resin 405 nm Wavelength Ultraviolet Resin

Slicer Software CHITUBOX

File Type .CTB

Working Environment Temperature 10 ℃~35 ℃

Working Environment Humidity 30%~70%


Electrical Parameter

Power Adapter Input: 100V~240V, 50/60Hz, Output: 12V/5A

Connectivity USB

Touch Screen 3.5 -Inch Full-color Touch Screen

LCD Screen Resolution 2K Forming Screen


Mechanical Parameter

Printer Size 286(L)*226(W)*372(H) mm

Package Size 353(L)*293(W)*464(H) mm

Net Weight 4.2 kg

Gross Weight 5.8 kg


Watch the user manual and unboxing video before assembling the printer.

Printer Maintenance

How to replace UV light

The following is a video tutorial to replace the UV lamp, please follow the tutorial.

https://www.youtube.com/watch?v=_T1C7oRtg7g

How to replace motherboard

The following is a video tutorial to replace the motherboard, please follow the tutorial.

https://www.youtube.com/watch?v=SpL1zfbAV0k

How to replace FEP film

First please prepare a sheet of FEP film, which can be purchased from the link below. FEP film

Unscrew the screws in the picture below.

A1.png

Install the new FEP film, take care not to exhaust the screws when screwing, just make sure to screw well. Because too much force will cause damage to the pressure plate fixing FEP film, as shown in the figure below.

A2.png

How to replace power supply

Below is the power supply, if the light on the power supply is not bright, it needs to be replaced. Please contact technical support.

A3.png

How to replace Print screen

Please click the exposure test button in the image below to perform the exposure test.

A6.png

Please check whether the print screen under the exposure test is as shown below. If the effect is not good, you need to replace the print screen.

A7.png

Unscrew the screen and replace it with a new screen. Contact technical support to purchase a printed screen.

Trouble Shooting

Pressure plate failure

The pressure plate is broken as shown in the figure below.

A2.png

The rupture of the pressure plate will cause the resin in the resin box to leak onto the printing screen, and the resin is corrosive and likely to corrode the printing screen. When replacing the FEP film, please be careful not to use too much force, just make sure that the screw is screwed properly, if too much force will cause the pressure plate to crack.Contact technical support to purchase a pressure plate.

Print screen damage

Please refer to the replacement print screen above. If the resin in the resin box leaks onto the printing screen, the resin is corrosive and is likely to corrode the printing screen.

Resin non-stick forming platform

Please re-level, be careful not to tighten all screws at once after zero, which will cause the forming platform to skew. Turn the four screws in turn until they are half loose and half tight, and then tighten all screws after ensuring that they are level. Try printing another model after leveling it.

A8.png

If the hot bed is still non-stick, please perform an exposure test to check that the print screen and UV etc. can work properly.

The display does not light up

Check whether the power indicator is on when the power is powered on. If the indicator is on normally, disassemble the base according to the following figure.

A9.png

Check whether the cable connecting the power supply to the mainboard is loose.

A10.png

If it is not loose, please connect the motherboard and the computer with a USB cable, and check whether the device manager on the computer can recognize the motherboard. If not, the motherboard is broken and needs to be replaced. If it can be identified, it is the display is broken, need to replace the display, please contact technical support to buy.

Cleaning of resin after printing

Please click the button on the screen to clean the tray and clean it with alcohol or professional IPA cleaner. If the cleaning is still incomplete, please click the link below to buy a cleaner. GWC01GWC02

A6.png

The printer cannot recognize the file

Alkaid can only identify files with the suffix.ctb and print them. Please print the cut files on the USB flash drive.

A11.png

If the printer cannot print.ctb files, refresh the firmware. Below is the firmware link, please download the firmware file in the red box and refresh it.

A12.png

If the file is still not recognized after updating the firmware, then the USB port is damaged and needs to be replaced, please contact technical support to replace it.