Tiny210

Overview

CPU: 1 GHz Samsung S5PV210 with PowerVR SGX540 graphics engine

DDR2 RAM: 512MB DDR2 RAM, 32bit data bus, 200MHz

FLASH: SLC NAND Flash: 256MB/1GB

Multi-IO:

on Board: HDMI interface 4 x User Leds(Green) 1 x Power Led(Red)

Supply Voltage from 2V to 6V Mechanical: Dimension: 64x 50x 11mm Software: Android 4.0, Android 2.3, Linux 2.6.35, Qtopia-2.2.0/Qt-4.4.3/Qt-4.7

Integrated USB 2.0 Hub: Extended 4 USB host ports, three of them as the standard side port,and one was lead by SCON interface
AV CCD Camera In: Integrated TVP5150 video chip: 2 AV input port (RCA), can be directlyconnected using a CCD camera
RS485: 1 RS485 interface
Serial Port: 4 serial port, two of them have been converted to RS232, and leads through the

DB9 Block (COM0, COM1), through the CON1, 2, 3, 4, Block leads to TTL level

keys: 8 key
RJ45 Ethernet port: using DM9000AEP, 10/100M adaptive
Audio input and output: using the WM8960 professional audio chip, containing Class D

amplifier on-board microphone, and supports HDMI audio and video synchronization output

USB Slave: 1 Road, the USB 2.0 specification
Infrared receiver: 1
ADC input: 6 ADC input
Buzzer: 1, control by the PWM0
EEPROM:AT24C08 (256 Byte) for I2C test
LCD Interface: 2 LCD interface, both 40 Pin 0.5mm Pitch Chip Block, support 3.5 "-19" fullcolor TFT display LCD
SDIO interface: used to connect the SDWiFi module and other
CMOS Camera interface: used to connect CMOS camera
RTC clock: with a backup battery (according to different regions or time periods, mailing may remove the battery)
PCB layer: 2
PCB size: 180 x 130mm, can be easily fixed all kinds of LCD modules, especially the 7-inch LCD module
Power supply: DC-5V