Difference between revisions of "Triple axis gyroscope breakout"
(→Pin Out and Signal Description) |
(→Features) |
||
| Line 20: | Line 20: | ||
== Features == | == Features == | ||
| − | + | •Digital-output X-, Y-, and Z-Axis angular rate sensors (gyros) on one integrated circuit<br> | |
| − | + | •Digitally-programmable low-pass filter<br> | |
| − | + | •Low 6.5mA operating current consumption for long battery life<br> | |
| − | + | •Wide VDD supply voltage range of 2.1V to 3.6V<br> | |
| − | + | •Standby current: 5μA<br> | |
| − | + | •Digital-output temperature sensor<br> | |
| − | + | •Fast Mode I2C (400kHz) serial interface<br> | |
| − | + | •Optional external clock inputs of 32.768kHz or 19.2MHz to synchronize with system clock<br> | |
| − | + | •Pins broken out to a breadboard friendly 7-pin 0.1" pitch header<br> | |
| − | |||
== Pin Out and Signal Description == | == Pin Out and Signal Description == | ||
Revision as of 09:54, 7 May 2012
Contents
Product Overview
This is a breakout board for InvenSense's ITG-3205The ITG-3205 is the world’s first single-chip, digital-output, 3-axis MEMS gyro IC optimized for gaming, 3D mice, and 3D remote control applications. The part features enhanced bias and sensitivity temperature stability, reducing the need for user calibration. Low frequency noise is lower than previous generation devices, simplifying application development and making for more-responsive remote controls.
The ITG-3205 features three 16-bit analog-to-digital converters (ADCs) for digitizing the gyro outputs, a user-selectable internal low-pass filter bandwidth, and a Fast-Mode I2C (400kHz) interface. Additional features include an embedded temperature sensor and a 2% accurate internal oscillator. This breakthrough in gyroscope technology provides a dramatic 67% package size reduction, delivers a 50% power reduction, and has inherent cost advantages compared to competing multi-chip gyro solutions.
Applications
Motion-enabled game controllers
Motion-based portable gaming Motion-based
3D mice and 3D remote controls
“No Touch” UI
Health and sports monitoring
Features
•Digital-output X-, Y-, and Z-Axis angular rate sensors (gyros) on one integrated circuit
•Digitally-programmable low-pass filter
•Low 6.5mA operating current consumption for long battery life
•Wide VDD supply voltage range of 2.1V to 3.6V
•Standby current: 5μA
•Digital-output temperature sensor
•Fast Mode I2C (400kHz) serial interface
•Optional external clock inputs of 32.768kHz or 19.2MHz to synchronize with system clock
•Pins broken out to a breadboard friendly 7-pin 0.1" pitch header
Pin Out and Signal Description
Wiring Diagram
How to buy
Click here to buy Triple axis gyroscope breakout
