Difference between revisions of "Geeetech Mizar S 3D Printer"
From Geeetech Wiki
(→How to replace a hotend) |
(→How to replace a hotend) |
||
Line 38: | Line 38: | ||
'''Step 1 Preparing''' | '''Step 1 Preparing''' | ||
+ | |||
+ | [[File:Mizars002.png]] | ||
+ | |||
Preheat the nozzle to 220 Celsius from the LCD menu. | Preheat the nozzle to 220 Celsius from the LCD menu. | ||
− | |||
− | |||
Unload the filament from the hotend. | Unload the filament from the hotend. |
Revision as of 03:12, 4 January 2023
Contents
Introduction
Product details
Unpacking and proper handling
Slicing
Printer maintenance
How to replace a hotend
Tools necessary for this guide |
---|
Wrench size 10 mm
Allen keys – 1.5/2/2.5/3 mm Flat screwdriver tip width 2.5 mm Diagonal pliers Electrical tape Zip ties Craft knife or equivalent |
Step 1 Preparing
Preheat the nozzle to 220 Celsius from the LCD menu.
Unload the filament from the hotend.
Remove the Teflon tube from the hotend.
Turn the printer off and unplug it from the socket!
How to clean the hotend and replace a nozzle
Tools necessary for this guide |
---|
Tweezers for nozzle
Wrench size 6/10/20 mm Cleaner rod (1.5mm diameter, 100mm length) Needle for nozzle Allen key - 2 mm |
How to replace a control board
Tools necessary for this guide |
---|
Allen keys – 2.5/3 mm
Flat screwdriver tip width 2.5 mm |
How to replace PSU
Tools necessary for this guide |
---|
Allen keys - 2.5/3 mm
Philips screwdriver for PSU cables |
How to replace a hotbed
Tools necessary for this guide |
---|
Allen keys – 3 mm
Flat screwdriver tip width 2.5 mm Diagonal pilers Zip ties |
How to replace a screen
Tools necessary for this guide |
---|
Allen keys - 2.5/3 mm |