Difference between revisions of "Geeetech Mizar S 3D Printer"
From Geeetech Wiki
(→How to replace a screen) |
(→How to replace a hotend) |
||
| Line 34: | Line 34: | ||
Craft knife or equivalent | Craft knife or equivalent | ||
|} | |} | ||
| + | |||
| + | |||
| + | |||
| + | '''Step 1 Preparing''' | ||
| + | |||
| + | Preheat the nozzle to 220 Celsius from the LCD menu. | ||
| + | |||
| + | Unload the filament from the hotend. | ||
| + | |||
| + | Remove the Teflon tube from the hotend.<sub>Subscript text</sub> | ||
| + | |||
| + | Turn the printer off and unplug it from the socket! | ||
=== '''How to clean the hotend and replace a nozzle'''=== | === '''How to clean the hotend and replace a nozzle'''=== | ||
Revision as of 02:57, 4 January 2023
Contents
Introduction
Product details
Unpacking and proper handling
Slicing
Printer maintenance
How to replace a hotend
| Tools necessary for this guide |
|---|
| Wrench size 10 mm
Allen keys – 1.5/2/2.5/3 mm Flat screwdriver tip width 2.5 mm Diagonal pliers Electrical tape Zip ties Craft knife or equivalent |
Step 1 Preparing
Preheat the nozzle to 220 Celsius from the LCD menu.
Unload the filament from the hotend.
Remove the Teflon tube from the hotend.Subscript text
Turn the printer off and unplug it from the socket!
How to clean the hotend and replace a nozzle
| Tools necessary for this guide |
|---|
| Tweezers for nozzle
Wrench size 6/10/20 mm Cleaner rod (1.5mm diameter, 100mm length) Needle for nozzle Allen key - 2 mm |
How to replace a control board
| Tools necessary for this guide |
|---|
| Allen keys – 2.5/3 mm
Flat screwdriver tip width 2.5 mm |
How to replace PSU
| Tools necessary for this guide |
|---|
| Allen keys - 2.5/3 mm
Philips screwdriver for PSU cables |
How to replace a hotbed
| Tools necessary for this guide |
|---|
| Allen keys – 3 mm
Flat screwdriver tip width 2.5 mm Diagonal pilers Zip ties |
How to replace a screen
| Tools necessary for this guide |
|---|
| Allen keys - 2.5/3 mm |
