Difference between revisions of "Make Bot MightyBoard RevE"

From Geeetech Wiki
Jump to: navigation, search
(Created page with "==Introduction== This is the MakerBot MightyBoard, a revolution in 3D Printer Control Technology. Use it to power your MakerBot Replicator 3D Printer. Here are just a few thin...")
 
(No difference)

Latest revision as of 07:12, 21 August 2014

Introduction

This is the MakerBot MightyBoard, a revolution in 3D Printer Control Technology. Use it to power your MakerBot Replicator 3D Printer. Here are just a few things the MightyBoard can do: control up to 5 stepper motors with BotStep Stepper Controllers, control up to two extruders (with heater cartridges, safety thermostats, thermocouples, and fans), control the Replicator Interface Board, connect to up to 6 endstops, control RGB LED light strips, control a heated build platform, and much much more!

Features

  • Pizeo Buzzer
  • Lots of Debugging LEDs and extra I/O pins broken out for hacking
  • Access to I2C and UART for hacking
  • Hardware-based safety cutoff for extruders
  • Extra FET for hacking
  • Arduino Mega Compatible
  • digitally-controlled potentiometers for setting motor currents (no more trimpots!)