Difference between revisions of "Tiny210"
From Geeetech Wiki
(→Tiny210Mother board) |
(→Tiny210Mother board) |
||
| Line 34: | Line 34: | ||
== Tiny210Mother board == | == Tiny210Mother board == | ||
| − | # Integrated USB 2.0 Hub: Extended 4 USB host ports, three of them as the standard side port, | + | # Integrated USB 2.0 Hub: Extended 4 USB host ports, three of them as the standard side port,and one was lead by SCON interface |
| − | and one was lead by SCON interface | + | # AV CCD Camera In: Integrated TVP5150 video chip: 2 AV input port (RCA), can be directly connected using a CCD camera |
| − | # AV CCD Camera In: Integrated TVP5150 video chip: 2 AV input port (RCA), can be directly | ||
| − | connected using a CCD camera | ||
# RS485: 1 RS485 interface | # RS485: 1 RS485 interface | ||
| − | # Serial Port: 4 serial port, two of them have been converted to RS232, and leads through the | + | # Serial Port: 4 serial port, two of them have been converted to RS232, and leads through the DB9 Block (COM0, COM1), through the CON1, 2, 3, 4, Block leads to TTL level |
| − | DB9 Block (COM0, COM1), through the CON1, 2, 3, 4, Block leads to TTL level | ||
# keys: 8 key | # keys: 8 key | ||
# RJ45 Ethernet port: using DM9000AEP, 10/100M adaptive | # RJ45 Ethernet port: using DM9000AEP, 10/100M adaptive | ||
| − | # Audio input and output: using the WM8960 professional audio chip, containing Class D | + | # Audio input and output: using the WM8960 professional audio chip, containing Class D amplifier on-board microphone, and supports HDMI audio and video synchronization output |
| − | amplifier on-board microphone, and supports HDMI audio and video synchronization output | ||
# USB Slave: 1 Road, the USB 2.0 specification | # USB Slave: 1 Road, the USB 2.0 specification | ||
# Infrared receiver: 1 | # Infrared receiver: 1 | ||
| Line 50: | Line 46: | ||
# Buzzer: 1, control by the PWM0 | # Buzzer: 1, control by the PWM0 | ||
# EEPROM:AT24C08 (256 Byte) for I2C test | # EEPROM:AT24C08 (256 Byte) for I2C test | ||
| − | # LCD Interface: 2 LCD interface, both 40 Pin 0.5mm Pitch Chip Block, support 3.5 "-19" full | + | # LCD Interface: 2 LCD interface, both 40 Pin 0.5mm Pitch Chip Block, support 3.5 "-19" full color TFT display LCD |
| − | color TFT display LCD | ||
# SDIO interface: used to connect the SDWiFi module and other | # SDIO interface: used to connect the SDWiFi module and other | ||
# CMOS Camera interface: used to connect CMOS camera | # CMOS Camera interface: used to connect CMOS camera | ||
| − | # RTC clock: with a backup battery (according to different regions or time periods, mailing may | + | # RTC clock: with a backup battery (according to different regions or time periods, mailing may remove the battery) |
| − | remove the battery) | ||
# PCB layer: 2 | # PCB layer: 2 | ||
# PCB size: 180 x 130mm, can be easily fixed all kinds of LCD modules, especially the 7-inch | # PCB size: 180 x 130mm, can be easily fixed all kinds of LCD modules, especially the 7-inch | ||
LCD module | LCD module | ||
# Power supply: DC-5V | # Power supply: DC-5V | ||
Revision as of 07:44, 23 February 2012
Overview
- 1GHz Samsung S5PV210 with PowerVR SGX540 graphics engine
- 512MB DDR2 RAM and 1GB NAND Flash
- LCD/Touch Screen, HDMI,TV out, Audio support
- TF card, USB Host/OTG support
- Ethernet, WiFi, serial port, GPIO
- Contain CPU board
- Linux 2.6.35 & Android 2.3 support
CPU board Hardware info
CPU: 1 GHz Samsung S5PV210 with PowerVR SGX540 graphics engine
DDR2 RAM: 512MB DDR2 RAM, 32bit data bus, 200MHz
FLASH: SLC NAND Flash: 256MB/1GB
Multi-IO:
- 2 x 60 Pin 2.0mm space DIP connector
- 1 x 30 Pin 2.0mm space DIP connector
- 1 x 51 Pin 1.0mm space SMD connector
on Board: HDMI interface 4 x User Leds(Green) 1 x Power Led(Red)
Supply Voltage from 2V to 6V Mechanical: Dimension: 64x 50x 11mm Software: Android 4.0, Android 2.3, Linux 2.6.35, Qtopia-2.2.0/Qt-4.4.3/Qt-4.7
Tiny210Mother board
- Integrated USB 2.0 Hub: Extended 4 USB host ports, three of them as the standard side port,and one was lead by SCON interface
- AV CCD Camera In: Integrated TVP5150 video chip: 2 AV input port (RCA), can be directly connected using a CCD camera
- RS485: 1 RS485 interface
- Serial Port: 4 serial port, two of them have been converted to RS232, and leads through the DB9 Block (COM0, COM1), through the CON1, 2, 3, 4, Block leads to TTL level
- keys: 8 key
- RJ45 Ethernet port: using DM9000AEP, 10/100M adaptive
- Audio input and output: using the WM8960 professional audio chip, containing Class D amplifier on-board microphone, and supports HDMI audio and video synchronization output
- USB Slave: 1 Road, the USB 2.0 specification
- Infrared receiver: 1
- ADC input: 6 ADC input
- Buzzer: 1, control by the PWM0
- EEPROM:AT24C08 (256 Byte) for I2C test
- LCD Interface: 2 LCD interface, both 40 Pin 0.5mm Pitch Chip Block, support 3.5 "-19" full color TFT display LCD
- SDIO interface: used to connect the SDWiFi module and other
- CMOS Camera interface: used to connect CMOS camera
- RTC clock: with a backup battery (according to different regions or time periods, mailing may remove the battery)
- PCB layer: 2
- PCB size: 180 x 130mm, can be easily fixed all kinds of LCD modules, especially the 7-inch
LCD module
- Power supply: DC-5V
