Difference between revisions of "Altitude hold mode"
From Geeetech Wiki
(Created page with " == How to use: == *Set up your hover button from the GUI. By default for PS3_Mode_1 its the L1 button of the PS3 controller. *When you press this button, it sets the target ...") |
(No difference)
|
Revision as of 02:00, 21 November 2013
How to use:
- Set up your hover button from the GUI. By default for PS3_Mode_1 its the L1 button of the PS3 controller.
- When you press this button, it sets the target altitude as the current altitude.
- Hold the button to remain in hover mode.
- While in hover mode, the throttle can be used to change the target altitude. Eg holding throttle up for a second raises it about a meter.
- Release the button to return to manual mode.
- Next time you enter hover mode, the target altitude is reset to the current altitude again.
- A good tip: Let go of the throttle immediately after entering hover mode. Its very easy to forget that one is holding it up and the flie will continue to rise.
