Difference between revisions of "Quadcopter"
From Geeetech Wiki
| Line 11: | Line 11: | ||
== Hardware Specification == | == Hardware Specification == | ||
| − | + | *Powerful 32 bit MCU: STM32F103CB @ 72 MHz (128kb flash, 20kb RAM) | |
| + | *3-axis high-performance MEMs gyros with 3-axis accelerometer: Invensense MPU-6050 | ||
| + | *Available footprints to manually solder magnetometer HMC5883L/HMC5983 or/and barometer MS5611 (Mounted on the 10-DOF version) | ||
| + | *Expansion header 2×10 pins 1.27mm (0.05”) pitch including power, I2C/UART, SPI/ADC. Header also contains ARM Cortex 10-pin JTAG (header not included) | ||
== Features == | == Features == | ||
Revision as of 06:10, 13 November 2013
1 Introduction 2 Hardware Specification 3 Features 4 Usage 5 How to buy
Introduction
The Crazyflie is a tiny quadcopter often referred to as a nano-quad, built using the PCB itself as the frame. Developed solely by open source tools and designed with development in mind. E.g. we choose 0603 components (resistors & caps) over 0402 to make it easier to replace components. The voltage regulators are adjustable which makes it possible to change the digital and analog supply voltages simply by changing a couple of resistors.
Hardware Specification
- Powerful 32 bit MCU: STM32F103CB @ 72 MHz (128kb flash, 20kb RAM)
- 3-axis high-performance MEMs gyros with 3-axis accelerometer: Invensense MPU-6050
- Available footprints to manually solder magnetometer HMC5883L/HMC5983 or/and barometer MS5611 (Mounted on the 10-DOF version)
- Expansion header 2×10 pins 1.27mm (0.05”) pitch including power, I2C/UART, SPI/ADC. Header also contains ARM Cortex 10-pin JTAG (header not included)
