Difference between revisions of "Geeetech Mizar S 3D Printer"

From Geeetech Wiki
Jump to: navigation, search
(Replace Hotend)
(How to replace a hotend)
Line 15: Line 15:
 
=== '''How to replace a hotend '''===
 
=== '''How to replace a hotend '''===
  
 +
'''Step 1''' Tools necessary for this guide
 +
 +
Wrench size 10 mm
 +
 +
Allen keys – 1.5/2/2.5/3 mm
 +
 +
Flat screwdriver tip width 2.5 mm
 +
 +
Diagonal pliers
 +
 +
Electrical tape
 +
 +
Zip ties
 +
 +
Craft knife or equivalent
  
 
=== '''How to replace a hotend and a nozzle'''===
 
=== '''How to replace a hotend and a nozzle'''===

Revision as of 02:06, 4 January 2023

Introduction

Product details

Unpacking and proper handling

Slicing

Printer maintenance

How to replace a hotend

Step 1 Tools necessary for this guide

Wrench size 10 mm

Allen keys – 1.5/2/2.5/3 mm

Flat screwdriver tip width 2.5 mm

Diagonal pliers

Electrical tape

Zip ties

Craft knife or equivalent

How to replace a hotend and a nozzle

How to replace a control board

How to replace PSU

How to replace a hotbed

How to replace a screen