Revision as of 07:36, 12 August 2022

Introduction

THUNDER is a high speed FDM 3D printer with a printing speed of up to 300mm/s. After two years of research and development and testing by GEEETECH engineers, it has achieved high speed printing while ensuring excellent printing quality. It is an excellent 3D printer that can save a lot of precious time for 3D printing enthusiasts.

File:Thunder.jpg

Product Features

•Technology: FDM

•High speed printing, speed up to 300mm/s

•All metal body, stable and reliable structure

•Fixed hotbed, no more frequent leveling

•High speed dual gear drive extruder, excellent performance,stand wear and tear

•Motor control: X/Y axis adopts closed-loop drive control,Z axis adopts TMC2208 drive

•Dual Z-axis

•Strong cooling hotend fan: 4010*1, Part Cooling Fan: 5015*2, Auxiliary Part Cooling Fan: 6020*2

•Leveling: support manual leveling and auto-leveing

•Filament broken detection: standard packed with filament broken detection sensor

•Screen password protection: During the printing process, the screen is locked with a password to prevent the printing failure caused by the accidental change of printing parameters

•One button to strong cooling: one button to completely open the hot end fan and auxiliary part cooling fan

•Multi printing modes: THUNDER inserted 4 printing modes for different speed level printing, meanwhile, it has a User Mode for users to customize printing parameters

•Break-resuming capability

•Printing lighting: THUNDER designed a white LED light on the hotend, convenient for checking the nozzle and model condition

Product Specifications

•CPU: ARM Cortex-M4 Core, 168MHz

•Printing Speed: ≤300mm/s

•Maximum Acceleration: x=5000mm/s², y=4000mm/s²

•Motion Controller CPU: ARM Cortex-M3 Core, 72MHz

•Printing Volume: 250*250*260mm

•Nozzle Max Temperature: 250℃

•Hotbed Max Temperature: 110℃

•Display: 3.5-inch Color Touch Screen

•Nozzle Diameter(Optional): 0.2mm, 0.6mm, 0.8mm

•Filament Diameter: 1.75mm

•X/Y Motor Control: Closed-Loop Control

•Z-axis Motor Control: TMC2208

•Power Input: AC 115/230V, 50/60Hz

•Power Supply: 350W

•Working Noise: ≤50dB，Normal Mode (Auxiliary Part Cooling Fan Not Turned On, Hotend Heat Dissipation Fan Strong Cold Mode Closed)

•Machine Size: 472(L)*488(W)*525(H)mm

•Package Size: 553(L)*544(W)*330(H)mm

•Net Weight: 10.7kg

•Packing Weight: 13.4kg

Notice

•Please read this document carefully to ensure that you understand each installation step, which will improve the efficiency of your assembly and reduce errors;

•Before starting the power supply, ensure that the voltage range of the power supply is consistent with the local voltage used by the user to prevent power damage;

•Please place the printer in a spacious, flat and ventilated environment. If you do not use the machine for a long time, please pay attention to waterproof and moisture-proof protection for the printer;

•Do not touch any moving parts while the printer is running to avoid personal injury;

•Do not touch the nozzle and hot bed when the printer is working, so as not to cause burns;

•When using the touch screen in the printing process, please pay attention to the movement of the hot bed to prevent the hot bed from hitting your fingers;

•Please use the printer in the environment of 10~40℃, otherwise the printing will be adversely affected;

•Before using the 3D printer, please level the hot bed first. Thunder is equipped with 3D-Touch automatic leveling accessory. Please install the 3D-Touch before leveling the hot bed.You can also use manual hot-bed leveling if you do not have 3D-Touch installed.