Difference between revisions of "Prusa I3 A pro 3D Printer"
(Created page with "Prusa I3 A pro 3D printer DIY kit This Prusa I3 A pro 3D printer is streamlined and optimized based on the previous Geeetech Prusa Aluminum I3 3D printer. This Prusa I3 A pro...") |
|||
Line 1: | Line 1: | ||
− | + | =Introduction= | |
This Prusa I3 A pro 3D printer is streamlined and optimized based on the previous Geeetech Prusa Aluminum I3 3D printer. This Prusa I3 A pro has the following features. | This Prusa I3 A pro 3D printer is streamlined and optimized based on the previous Geeetech Prusa Aluminum I3 3D printer. This Prusa I3 A pro has the following features. | ||
+ | |||
3-in-1 3D printer control box | 3-in-1 3D printer control box | ||
+ | |||
As you can see, the most obvious modification is that we add a 3-in-1 3D printer control box for this Prusa I3 A pro which gathers the motherboard, power supply and LCD Cpanel in one box, saving the space taken by the printer and bringing you a neat and organized desktop, most importantly, the power supply is installed inside the control box now, which is not only for protecting the power supply, but also for eliminating unnecessary dangers, protecting your family and your pets. | As you can see, the most obvious modification is that we add a 3-in-1 3D printer control box for this Prusa I3 A pro which gathers the motherboard, power supply and LCD Cpanel in one box, saving the space taken by the printer and bringing you a neat and organized desktop, most importantly, the power supply is installed inside the control box now, which is not only for protecting the power supply, but also for eliminating unnecessary dangers, protecting your family and your pets. | ||
+ | |||
Easy assembly, easy debugging | Easy assembly, easy debugging | ||
− | High precision machined parts and well-designed mounting holes make the installation process simple and fast. The control box is already assembled by us, what you need to install is only the body, which saves a lot of time for you. The detailed assembly manual makes your DIY assembly easy and time-saving. Detailed instructions provide you with convenient debugging guidance. | + | |
− | Reserved design for upgrading | + | High precision machined parts and well-designed mounting holes make the installation process simple and fast. The control box is already assembled by us, what you need to install is only the body, which saves a lot of time for you. The detailed assembly manual makes your DIY assembly easy and time-saving. Detailed instructions provide you with convenient debugging guidance. |
+ | |||
+ | Reserved design for upgrading | ||
+ | |||
In consideration of your need to upgrade the extruder in the future, we use reserved design on this printer and you can upgrade any part. This kind of design provides you with more choices of revamping this printer and more ways to use it. | In consideration of your need to upgrade the extruder in the future, we use reserved design on this printer and you can upgrade any part. This kind of design provides you with more choices of revamping this printer and more ways to use it. | ||
− | + | Visible parts, convenient for trouble shooting | |
+ | |||
Compared with the box-type printer, Prusa I3 3D printer DIY kit is more suitable for starters. All the parts are visible, and you can easy access to those parts. It is very convenient for for trouble shooting when you are using the printer. | Compared with the box-type printer, Prusa I3 3D printer DIY kit is more suitable for starters. All the parts are visible, and you can easy access to those parts. It is very convenient for for trouble shooting when you are using the printer. | ||
− | Specifications | + | =Specifications= |
+ | |||
Printing specifications: | Printing specifications: | ||
+ | |||
Print technology: FFF/FDM | Print technology: FFF/FDM | ||
+ | |||
Build volume: 200 x200x190mm | Build volume: 200 x200x190mm | ||
+ | |||
Printing resolution: 0.1-0.3mm | Printing resolution: 0.1-0.3mm | ||
+ | |||
Filament diameter: 1.75mm | Filament diameter: 1.75mm | ||
+ | |||
Nozzle diameter: 0.4mm | Nozzle diameter: 0.4mm | ||
+ | |||
Filament type: ABS/ PLA/Flexible PLA/Wood-polymer | Filament type: ABS/ PLA/Flexible PLA/Wood-polymer | ||
Software: | Software: | ||
+ | |||
Operating system: Windows/Mac/Linux | Operating system: Windows/Mac/Linux | ||
+ | |||
Control software: Repetier-Host, Printrun | Control software: Repetier-Host, Printrun | ||
+ | |||
File format: .STL , G-code | File format: .STL , G-code | ||
+ | |||
Temperature: | Temperature: | ||
+ | |||
Max heated bed temperature: about 110°C | Max heated bed temperature: about 110°C | ||
+ | |||
Max extruder temperature: about 240°C | Max extruder temperature: about 240°C | ||
Electrical: | Electrical: | ||
+ | |||
Power supply: | Power supply: | ||
+ | |||
Input: 115V or 230V | Input: 115V or 230V | ||
+ | |||
Output:DC12V/20A | Output:DC12V/20A | ||
+ | |||
Control board: GT2560 | Control board: GT2560 | ||
+ | |||
LCD: LCD12864 | LCD: LCD12864 | ||
+ | |||
Connectivity: USB, SD card (support stand-alone printing) | Connectivity: USB, SD card (support stand-alone printing) | ||
Mechanical: | Mechanical: | ||
− | Body: Aluminum plate of 6 mm thickness | + | |
+ | Body: Aluminum plate of 6 mm thickness | ||
+ | |||
Build Platform: aluminum platform + MK2A heated bed | Build Platform: aluminum platform + MK2A heated bed | ||
+ | |||
XYZ Rods: Wear-resistant, stainless steel | XYZ Rods: Wear-resistant, stainless steel | ||
+ | |||
Stepper Motors: 1.8° step angle with 1/16 micro-stepping | Stepper Motors: 1.8° step angle with 1/16 micro-stepping | ||
+ | |||
Physical structure: Reprap | Physical structure: Reprap | ||
Physical dimensions: | Physical dimensions: | ||
+ | |||
Machine size: 450x380x435mm | Machine size: 450x380x435mm | ||
+ | |||
Shipping box: 520 x 420 x 230 mm | Shipping box: 520 x 420 x 230 mm | ||
+ | |||
Net weight: 7.2 kg | Net weight: 7.2 kg | ||
+ | |||
Shipping weight: 11.5kg | Shipping weight: 11.5kg |
Revision as of 03:07, 26 February 2016
Introduction
This Prusa I3 A pro 3D printer is streamlined and optimized based on the previous Geeetech Prusa Aluminum I3 3D printer. This Prusa I3 A pro has the following features.
3-in-1 3D printer control box
As you can see, the most obvious modification is that we add a 3-in-1 3D printer control box for this Prusa I3 A pro which gathers the motherboard, power supply and LCD Cpanel in one box, saving the space taken by the printer and bringing you a neat and organized desktop, most importantly, the power supply is installed inside the control box now, which is not only for protecting the power supply, but also for eliminating unnecessary dangers, protecting your family and your pets.
Easy assembly, easy debugging
High precision machined parts and well-designed mounting holes make the installation process simple and fast. The control box is already assembled by us, what you need to install is only the body, which saves a lot of time for you. The detailed assembly manual makes your DIY assembly easy and time-saving. Detailed instructions provide you with convenient debugging guidance.
Reserved design for upgrading
In consideration of your need to upgrade the extruder in the future, we use reserved design on this printer and you can upgrade any part. This kind of design provides you with more choices of revamping this printer and more ways to use it. Visible parts, convenient for trouble shooting
Compared with the box-type printer, Prusa I3 3D printer DIY kit is more suitable for starters. All the parts are visible, and you can easy access to those parts. It is very convenient for for trouble shooting when you are using the printer.
Specifications
Printing specifications:
Print technology: FFF/FDM
Build volume: 200 x200x190mm
Printing resolution: 0.1-0.3mm
Filament diameter: 1.75mm
Nozzle diameter: 0.4mm
Filament type: ABS/ PLA/Flexible PLA/Wood-polymer
Software:
Operating system: Windows/Mac/Linux
Control software: Repetier-Host, Printrun
File format: .STL , G-code
Temperature:
Max heated bed temperature: about 110°C
Max extruder temperature: about 240°C
Electrical:
Power supply:
Input: 115V or 230V
Output:DC12V/20A
Control board: GT2560
LCD: LCD12864
Connectivity: USB, SD card (support stand-alone printing)
Mechanical:
Body: Aluminum plate of 6 mm thickness
Build Platform: aluminum platform + MK2A heated bed
XYZ Rods: Wear-resistant, stainless steel
Stepper Motors: 1.8° step angle with 1/16 micro-stepping
Physical structure: Reprap
Physical dimensions:
Machine size: 450x380x435mm
Shipping box: 520 x 420 x 230 mm
Net weight: 7.2 kg
Shipping weight: 11.5kg