Difference between revisions of "Hot End V2.0"
(→Description) |
(→Product Introduction) |
||
| Line 35: | Line 35: | ||
| Input voltage ||| default to 12V | | Input voltage ||| default to 12V | ||
|- | |- | ||
| − | | Heating voltage of extruding head ||| 12V | + | | Heating voltage of extruding head ||| 12V |
|- | |- | ||
| Thermisto ||| 100K 1% high-precision NTC Thermistor | | Thermisto ||| 100K 1% high-precision NTC Thermistor | ||
Revision as of 10:50, 17 June 2014
Description
The 2.0 version is a high performance hotend for use with RepRap and other 3D printers,making your printing even faster. The hot end comes completely assembled: wire it to your electronics and it is ready to print. It now includes an aluminum mount plate and aluminum heat sinks. The 2.0 also brings changes to the nozzle, heater block, and threaded extension with harder aluminum and revised thread profile for more reliable nozzle changes.
This product adopts Teflon and aluminum alloy heat radiator for heat dissipation and duralumin alloy nozzle. Its surface is covered with anodic oxide coating, which can resist oxidation corrosion and increase nozzle hardness. Since the heat-insulated pipe is designed with Teflon, the material will not soften easily, thus ensuring finer and more stable printing.
Product Introduction
| Suitable raw material | PLA and ABS |
| Printing resolution | 0.1mm |
| Molding form | FDM |
| Material | Metal |
| Nozzle diameter | optional, 0.3, 0.35, 0.4 & 0.5 optional |
| Printing thickness | 0.1mm-0.3mm |
| Nozzle temperature | 180℃-240℃ |
| Movement speed | 50cc |
| Outline dimensions | 66*70*40mm L/H/W) |
| Weight | 120g |
| Input voltage | default to 12V |
| Heating voltage of extruding head | 12V |
| Thermisto | 100K 1% high-precision NTC Thermistor |
| Cartridge heater | 12V 30W |
