Difference between revisions of "Arduino YUN"
(→Summary) |
(→Summary) |
||
Line 45: | Line 45: | ||
|- | |- | ||
| Clock Speed ||| 16 MHz | | Clock Speed ||| 16 MHz | ||
+ | |} | ||
+ | '''Linux microprocessor''' | ||
+ | {|border="1" cellspacing="0" | ||
+ | |- | ||
+ | | Processor ||| Atheros AR9331 | ||
+ | |- | ||
+ | | Architecture ||| MIPS @400MHz | ||
+ | |- | ||
+ | | Operating Voltage ||| 3.3V | ||
+ | |- | ||
+ | | Ethernet ||| IEEE 802.3 10/100Mbit/s | ||
+ | |- | ||
+ | | WiFi ||| IEEE 802.11b/g/n | ||
+ | |- | ||
+ | | USB Type-A ||| 2.0 Host/Device | ||
+ | |- | ||
+ | | Card Reader ||| Micro-SD only | ||
+ | |- | ||
+ | | RAM ||| 64 MB DDR2 | ||
+ | |- | ||
+ | | Flash Memory ||| 16 MB | ||
|} | |} |
Revision as of 10:12, 23 May 2014
Description
The Arduino Yún is a microcontroller board based on the ATmega32u4 (datasheet) and the Atheros AR9331. The Atheros processor supports a Linux distribution based on OpenWrt named OpenWrt-Yun. The board has built-in Ethernet and WiFi support, a USB-A port, micro-SD card slot, 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, an ICSP header, and a 3 reset buttons.
The Yún distinguishes itself from other Arduino boards in that it can communicate with the Linux distribution onboard, offering a powerful networked computer with the ease of Arduino. In addition to Linux commands like cURL, you can write your own shell and python scripts for robust interactions.
The Yún is similar to the Leonardo in that the ATmega32u4 has built-in USB communication, eliminating the need for a secondary processor. This allows the Yún to appear to a connected computer as a mouse and keyboard, in addition to a virtual (CDC) serial / COM port.
Summary
Because the Yún has two processors, the summary section shows the characteristics of each one in two separate tables.
AVR Arduino microcontroller
Microcontroller | ATmega32u4 |
Operating Voltage | 5V |
Input Voltage | 5V |
Digital I/O Pins | 20 |
PWM Channels | 7 |
Analog Input Channels | 12 |
DC Current per I/O Pin | 40 mA |
DC Current for 3.3V Pin | 50 mA |
Flash Memory | 32 KB (of which 4 KB used by bootloader) |
SRAM | 2.5 KB |
EEPROM | 1 KB |
Clock Speed | 16 MHz |
Linux microprocessor
Processor | Atheros AR9331 |
Architecture | MIPS @400MHz |
Operating Voltage | 3.3V |
Ethernet | IEEE 802.3 10/100Mbit/s |
WiFi | IEEE 802.11b/g/n |
USB Type-A | 2.0 Host/Device |
Card Reader | Micro-SD only |
RAM | 64 MB DDR2 |
Flash Memory | 16 MB |