Difference between revisions of "Bluetooth wirelessly download for DUE Pro"

From Geeetech Wiki
Jump to: navigation, search
Line 2: Line 2:
 
== Overview ==
 
== Overview ==
  
Wireless programming and data transmission  can be achieved simply from the BLuetooth.Now ,I will show my test.
+
Wireless programming and data transmission  can be achieved simply from the BLuetooth.You just need two  bluetooths and a USB serial FT232RL .
 +
Now ,I will show my test.
  
  
Line 36: Line 37:
 
You input command " AT+DEFAULT", then input  " AT +BAUD8". As the Iduino DUE download baud is 115200,if you want to transmit data ,
 
You input command " AT+DEFAULT", then input  " AT +BAUD8". As the Iduino DUE download baud is 115200,if you want to transmit data ,
  
you would set same baud for the software.
+
you would set same baud for the software.Two bluetooths to do the same action.
  
  
Two bluetooths to do the same action.
+
Of course ,there are a lot of ways to communicate between two bluetooths ,you can  reference [http://www.geeetech.com/Documents/Bluetooth%20manual.rar Bluetooth manual] to build commnnication ,we use most easy way and don't anything.
 
 
Of course ,there are a lot of ways to communicate between two bluetooths ,you can  reference     to build commnnication ,we use most easy way and don't anything.
 
  
 
4.Follow step 2 to connect master bluetooth and the USB serial FT232RL , and connect slave bluetooth to Iduino DUE like as:
 
4.Follow step 2 to connect master bluetooth and the USB serial FT232RL , and connect slave bluetooth to Iduino DUE like as:

Revision as of 09:07, 3 July 2013

Overview

Wireless programming and data transmission can be achieved simply from the BLuetooth.You just need two bluetooths and a USB serial FT232RL . Now ,I will show my test.


Hardware needed

Step

1.A Bluetooth module's key turns to "M" as master ,other's key turns to "S" as slave.

2.Connect the USB serial FT232RL and bluetooth

GND------GND


VCC------VCC


TX-------TX


RX-------RX


Some FT232 shields,you would connct TX to RX,and RX to TX.

3.Open Serial Monitor and set the bluetooth .

You input command " AT+DEFAULT", then input " AT +BAUD8". As the Iduino DUE download baud is 115200,if you want to transmit data ,

you would set same baud for the software.Two bluetooths to do the same action.


Of course ,there are a lot of ways to communicate between two bluetooths ,you can reference Bluetooth manual to build commnnication ,we use most easy way and don't anything.

4.Follow step 2 to connect master bluetooth and the USB serial FT232RL , and connect slave bluetooth to Iduino DUE like as:


GND------GND


VCC------3.3V


TX-------RX


RX-------TX


5.Power up for the Iduino DUE from battery, programming would fail if you power up from USB port .

If the bule LED of buletooth is light mean two buletooths communicate , blink is connecting.


Press the ERASS button 2 seconds ,then press the reset button.

Now you can wirelessly program for Iduino DUE Pro

Please open Aduino IDE 1.5 and selct Aduino DUE(programming port) in board.


We also wirelessly program and transmit data for other boards ,such as UNO,LilyPad,Arduino Pro Mini and so on. But you must set right baud for buletooth.

You can reference


DUE 115200


ATMEGA328 57600


ATMEGA168 19200


DUEMILANOVE328 57600