Difference between revisions of "Arduino buzzer Module"

Revision as of 03:14, 10 May 2012

Introduction

This is the Arduino Buzzer Module. Through the Arduino or other controllers, this module will be able to control the buzzer sounds or MID music easily. It is extended with the Arduino board sensors used in combination, to achieve the control of an interactive sound and light works.

Specification

Pin Definition

Usage

VCC - 5V GND - GND S - Digital pin2

Example code

int buzzPin =  2;    //Connect Buzzer on Digital Pin3 
void setup()   
 {         
 pinMode(buzzPin, OUTPUT);      
} 
 void loop()                      
{ 
 digitalWrite(buzzPin, HIGH); 
 delayMicroseconds(50); 
 digitalWrite(buzzPin, LOW);  
 delayMicroseconds(50);    
}

How to buy it

Click here to buy Arduino buzzer module