Difference between revisions of "Triple Axis Magnetometer Breakout"

From Geeetech Wiki
Jump to: navigation, search
(Block Diagram)
(Usage and demo code)
 
(8 intermediate revisions by the same user not shown)
Line 26: Line 26:
  
 
== Pin Out and Signal Description  ==
 
== Pin Out and Signal Description  ==
[[File:Hmc5883L1.jpg]]
+
[[File:Hmc5883L1.jpg|400px]]
 +
 
 
[[File:Hmc5883L pin.jpg]]
 
[[File:Hmc5883L pin.jpg]]
  
== Block Diagram  ==
+
== Usage and demo code ==
[[file:Hmc5883L schematic.jpg]]
+
[[File:Hm5883l连线图.png|400px]]
 +
 
 +
Arduino GND -> HMC5883L GND
 +
Arduino 3.3V -> HMC5883L VCC
 +
Arduino A4 (SDA) -> HMC5883L SDA
 +
Arduino A5 (SCL) -> HMC5883L SCL
 +
*You will also need to add two 'pull-up' resistors to enable I2C. For this, connect two 4.7k or 10k resistors between SDA and VCC, and SCL and VCC
 +
 
 +
==Document==
 +
[http://www.geeetech.com/Documents/HMC5883L_ArduinoLibrary.zip HMC5883L Arduino Library]
  
 
== How to buy  ==
 
== How to buy  ==
Click here to buy [http://www.geeetech.com/hmc5883l-triple-axis-compass-magnetometer-module-breakout-p-436.html Triple Axis Magnetometer Breakout]
+
Click here to buy [http://www.geeetech.com/hmc5883l-triple-axis-compass-magnetometer-module-breakout-p-436.html HMC5883L Triple Axis Magnetometer Breakout]

Latest revision as of 07:19, 8 May 2012

Product Overview

Hmc5883L.jpg

This is a breakout board for The Honeywell HMC5883L . The Honeywell HMC5883L is a multi-chip module designed for low-field magnetic sensing with a digital interface for applications such as low-cost compassing and magnetometry. The HMC5883L includes our state-of-the-art, high-resolution HMC118X series magneto-resistive sensors plus an ASIC containing amplification, automatic degaussing strap drivers, offset cancellation, and a 12-bit ADC that enables 1° to 2° compass heading accuracy. The I2C serial bus allows for easy interface. Applications for the HMC5883L include Mobile Phones, Netbooks, Consumer Electronics, Auto Navigation Systems, and Personal Navigation Devices.

The HMC5883L utilizes Honeywell’s Anisotropic Magnetoresistive (AMR) technology that provides advantages over other magnetic sensor technologies. These anisotropic, directional sensors feature precision in-axis sensitivity and linearity. These sensors’ solid-state construction with very low cross-axis sensitivity is designed to measure both the direction and the magnitude of Earth’s magnetic fields, from milli-gauss to 8 gauss. Honeywell’s Magnetic Sensors are among the most sensitive and reliable low-field sensors in the industry.

Applications

Mobile Phones, Netbooks
Consumer Electronics
Auto Navigation Systems
Personal Navigation Devices


Features

The Honeywell HMC5883L includes a wide range of features:
3-Axis Magnetoresistive Sensors and ASIC in a 3.0x3.0x0.9mm LCC Surface Mount Package
12-Bit ADC Coupled with Low Noise AMR Sensors Achieves 2 milli-gauss Field Resolution in ±8 Gauss Fields
Low Voltage Operations (2.16 to 3.6V) and Low Power Consumption (100 μ A)
I2C Digital Interface
Wide Magnetic Field Range (+/-8 Oe)

Pin Out and Signal Description

Hmc5883L1.jpg

Hmc5883L pin.jpg

Usage and demo code

Hm5883l连线图.png

Arduino GND -> HMC5883L GND
Arduino 3.3V -> HMC5883L VCC
Arduino A4 (SDA) -> HMC5883L SDA
Arduino A5 (SCL) -> HMC5883L SCL
  • You will also need to add two 'pull-up' resistors to enable I2C. For this, connect two 4.7k or 10k resistors between SDA and VCC, and SCL and VCC

Document

HMC5883L Arduino Library

How to buy

Click here to buy HMC5883L Triple Axis Magnetometer Breakout