Difference between revisions of "Hot End V2.0"
From Geeetech Wiki
(→Product Introduction) |
|||
| (4 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
== Description == | == Description == | ||
| + | This [http://www.geeetech.com/reprap-hot-end-v20-with-035mm-04mm-nozzle-p-685.html HotEnd V2.0] is compatible (or adaptable) almost all known 3D printer. | ||
The [http://www.geeetech.com/reprap-hot-end-v20-with-035mm-04mm-nozzle-p-685.html HotEnd V2.0] version is a high performance hotend for use with RepRap and other 3D printers,making your printing even faster. The hot end comes completely assembled: wire it to your electronics and it is ready to print. It now includes an aluminum mount plate and aluminum heat sinks. The [http://www.geeetech.com/reprap-hot-end-v20-with-035mm-04mm-nozzle-p-685.html HotEnd V2.0] also brings changes to the nozzle, heater block, and threaded extension with harder aluminum and revised thread profile for more reliable nozzle changes. | The [http://www.geeetech.com/reprap-hot-end-v20-with-035mm-04mm-nozzle-p-685.html HotEnd V2.0] version is a high performance hotend for use with RepRap and other 3D printers,making your printing even faster. The hot end comes completely assembled: wire it to your electronics and it is ready to print. It now includes an aluminum mount plate and aluminum heat sinks. The [http://www.geeetech.com/reprap-hot-end-v20-with-035mm-04mm-nozzle-p-685.html HotEnd V2.0] also brings changes to the nozzle, heater block, and threaded extension with harder aluminum and revised thread profile for more reliable nozzle changes. | ||
| Line 13: | Line 14: | ||
|- | |- | ||
| Suitable raw material ||| [http://www.geeetech.com/?main_page=index&cPath=83 PLA] and [http://www.geeetech.com/?main_page=index&cPath=83 ABS] | | Suitable raw material ||| [http://www.geeetech.com/?main_page=index&cPath=83 PLA] and [http://www.geeetech.com/?main_page=index&cPath=83 ABS] | ||
| + | |- | ||
| + | | Printing material ||| 1.75mm or 3mm [http://www.geeetech.com/?main_page=index&cPath=83 ABS] or [http://www.geeetech.com/?main_page=index&cPath=83 PLA] | ||
|- | |- | ||
| Printing resolution ||| 0.1mm | | Printing resolution ||| 0.1mm | ||
| Line 28: | Line 31: | ||
| Movement speed ||| 50cc | | Movement speed ||| 50cc | ||
|- | |- | ||
| − | | Outline dimensions ||| 66*70*40mm L/H/W | + | | Outline dimensions ||| 66*70*40mm L/H/W |
|- | |- | ||
| Weight ||| 120g | | Weight ||| 120g | ||
| Line 36: | Line 39: | ||
| Heating voltage of extruding head ||| 12V | | Heating voltage of extruding head ||| 12V | ||
|- | |- | ||
| − | | | + | | [http://www.geeetech.com/10pcs-100kohm-ntc-thermistors-for-jietai-hotend-p-836.html Thermistor] ||| 100K 1% high-precision NTC Thermistor |
|- | |- | ||
| [http://www.geeetech.com/12v-30w-cartridge-wire-heater-heating-wire-p-804.html Cartridge heater] ||| 12V 30W | | [http://www.geeetech.com/12v-30w-cartridge-wire-heater-heating-wire-p-804.html Cartridge heater] ||| 12V 30W | ||
|} | |} | ||
| − | |||
== How to buy == | == How to buy == | ||
Click here to buy [http://www.geeetech.com/reprap-hot-end-v20-with-035mm-04mm-nozzle-p-685.html HotEnd V2.0] | Click here to buy [http://www.geeetech.com/reprap-hot-end-v20-with-035mm-04mm-nozzle-p-685.html HotEnd V2.0] | ||
Latest revision as of 00:49, 23 June 2014
Description
This HotEnd V2.0 is compatible (or adaptable) almost all known 3D printer. The HotEnd V2.0 version is a high performance hotend for use with RepRap and other 3D printers,making your printing even faster. The hot end comes completely assembled: wire it to your electronics and it is ready to print. It now includes an aluminum mount plate and aluminum heat sinks. The HotEnd V2.0 also brings changes to the nozzle, heater block, and threaded extension with harder aluminum and revised thread profile for more reliable nozzle changes.
This product adopts Teflon and aluminum alloy heat radiator for heat dissipation and duralumin alloy nozzle. Its surface is covered with anodic oxide coating, which can resist oxidation corrosion and increase nozzle hardness. Since the heat-insulated pipe is designed with Teflon, the material will not soften easily, thus ensuring finer and more stable printing.
Product Introduction
| Suitable raw material | PLA and ABS |
| Printing material | 1.75mm or 3mm ABS or PLA |
| Printing resolution | 0.1mm |
| Molding form | FDM |
| Material | Metal |
| Nozzle diameter | 0.3, 0.35, 0.4 , 0.5 optional |
| Printing thickness | 0.1mm-0.3mm |
| Nozzle temperature | 180℃-240℃ |
| Movement speed | 50cc |
| Outline dimensions | 66*70*40mm L/H/W |
| Weight | 120g |
| Input voltage | default to 12V |
| Heating voltage of extruding head | 12V |
| Thermistor | 100K 1% high-precision NTC Thermistor |
| Cartridge heater | 12V 30W |
How to buy
Click here to buy HotEnd V2.0
