Difference between revisions of "Iduino DUE Pro"

From Geeetech Wiki
Jump to: navigation, search
(Differnece from Arduino DUE)
 
(18 intermediate revisions by the same user not shown)
Line 4: Line 4:
 
Iduino DUE Pro board derives from Arduino Due. It is completely compatible with Arduino Due. The microcontroller board also is based on
 
Iduino DUE Pro board derives from Arduino Due. It is completely compatible with Arduino Due. The microcontroller board also is based on
  
the[http://www.atmel.com/Images/doc11057.pdf  Atmel SAM3X8E ARM Cortex-M3 CPU ] .It has 54 digital input/output pins (of which 12 can be used as PWM outputs),12 analog inputs,
+
the [http://www.atmel.com/Images/doc11057.pdf  Atmel SAM3X8E ARM Cortex-M3 CPU ] .It has 54 digital input/output pins (of which 12 can be used as PWM outputs),12 analog inputs,
  
 
4 UARTs (hardware serial ports), a 84 MHz clock, an USB OTG capable connection, 2 DAC (digital to analog), 2 TWI, a power jack,an SPI header, a JTAG header,
 
4 UARTs (hardware serial ports), a 84 MHz clock, an USB OTG capable connection, 2 DAC (digital to analog), 2 TWI, a power jack,an SPI header, a JTAG header,
Line 18: Line 18:
  
  
Of course ,it is more cost-efficient  external programmer uses the [http://www.atmel.com/Images/doc7799.pdf  ATmega16U2 ]as a USB-to-serial chip connected to the first UART of the SAM3X .
+
The main reason why Iduino Due has pins for external programmer is to make more innovation. User may need other ways to programming it, such as [http://www.geeetech.com/wiki/index.php/Bluetooth_wirelessly_download_for_DUE_Pro#Comment  programming wirelessly], or through Internet.Of course ,it is more cost-efficient  external programmer uses the [http://www.atmel.com/Images/doc7799.pdf  ATmega16U2 ]as a USB-to-serial chip connected to the first
  
Similar with boards such as Arduino Mini or Arduino Pro, many board could share one external programmer.If you need 10 boards to build your projects,you only need
+
UART of the SAM3X . Similar with boards such as Arduino Mini or Arduino Pro, many board could share one external programmer.If you need 10 boards to build your  
  
one external programmer. That will save you much money.
+
projects,you only need one external programmer. That will save you much money.
  
  
Line 30: Line 30:
 
'''Note: DUE Pro USB/Serial Adapter don't plug in the header to Iduino DUE Pro board when power on from the DC power jack .'''
 
'''Note: DUE Pro USB/Serial Adapter don't plug in the header to Iduino DUE Pro board when power on from the DC power jack .'''
  
== About DUE Mini USB/Serial Adapter ==
+
== Differnece from Arduino DUE ==
 +
 
 +
1.The size gets smaller
 +
 
 +
2.Oscillator for RTC is assembled
 +
 
 +
3.Removed the ATmega16U2 chip, break out programming pins for external downloader.
 +
 
 +
4.5V Serial interface is available
 +
 
 +
== About DUE Pro USB/Serial Adapter ==
  
 
[[Image:DUE Mini USB1.jpg|500px]]
 
[[Image:DUE Mini USB1.jpg|500px]]
Line 93: Line 103:
  
 
== Documents: ==
 
== Documents: ==
 +
[http://www.geeetech.com/wiki/index.php/Bluetooth_wirelessly_download_for_DUE_Pro#Comment  programming wirelessly]
 +
 
[http://arduino.cc/en/uploads/Main/arduino-Due-schematic.pdf  Schematic:]
 
[http://arduino.cc/en/uploads/Main/arduino-Due-schematic.pdf  Schematic:]
  
Line 102: Line 114:
  
 
[http://arduino.cc/en/Main/ArduinoBoardDue Arduino Page:]
 
[http://arduino.cc/en/Main/ArduinoBoardDue Arduino Page:]
 +
 +
 +
 +
== How to buy ==
 +
 +
Click here: http://www.geeetech.com/iduino-due-pro-board-with-due-pro-usbserial-adapter-p-655.html
 +
 +
http://www.geeetech.com/iduino-due-pro-board-completely-compatible-with-arduino-due-p-656.html

Latest revision as of 07:03, 26 January 2015

Overview

DUE Mini 1.jpg

Iduino DUE Pro board derives from Arduino Due. It is completely compatible with Arduino Due. The microcontroller board also is based on

the Atmel SAM3X8E ARM Cortex-M3 CPU .It has 54 digital input/output pins (of which 12 can be used as PWM outputs),12 analog inputs,

4 UARTs (hardware serial ports), a 84 MHz clock, an USB OTG capable connection, 2 DAC (digital to analog), 2 TWI, a power jack,an SPI header, a JTAG header,

a reset button and an erase button.Users could program it with Arduino IDE(Arduino v1.5.2 Beta:).


We made some changes on the original board,because if you got the Arduino DUE board, you will feel on it is: oh, so complicated! While you found you could

program it through both USB port. We think, why not remove one and leave users more chances to develope on another , it could make the board simple. As

ATmega16U2 circuit takes very much space on the board, we decide to remove it. And all the pins for external programmer are broken out.


The main reason why Iduino Due has pins for external programmer is to make more innovation. User may need other ways to programming it, such as programming wirelessly, or through Internet.Of course ,it is more cost-efficient external programmer uses the ATmega16U2 as a USB-to-serial chip connected to the first

UART of the SAM3X . Similar with boards such as Arduino Mini or Arduino Pro, many board could share one external programmer.If you need 10 boards to build your

projects,you only need one external programmer. That will save you much money.


Warning: Unlike other Iduino boards, the Iduino Due Pro board runs at 3.3V. The maximum voltage that the I/O pins can tolerate is 3.3V. Providing higher voltages, like 5V to an I/O pin could damage the board.

Note: DUE Pro USB/Serial Adapter don't plug in the header to Iduino DUE Pro board when power on from the DC power jack .

Differnece from Arduino DUE

1.The size gets smaller

2.Oscillator for RTC is assembled

3.Removed the ATmega16U2 chip, break out programming pins for external downloader.

4.5V Serial interface is available

About DUE Pro USB/Serial Adapter

DUE Mini USB1.jpg DUE Mini USB2.jpg

The DUE Pro USB/Serial Adapter is designed based on the ATmega16U2 circuit on Arduino DUE. With the bended female header, users could plug in the header to

Iduino DUE Pro board.


Features:

  • Microcontroller: AT91SAM3X8E
  • Operating Voltage: 3.3V
  • Recommended Input Voltage: 7-12V
  • Min-Max Input Voltage: 6-15V
  • Digital I/O Pins: 54 (of which 12 provide PWM output)
  • Analog Input Pins: 12
  • Analog Outputs Pins: 2
  • Total DC Output Current on all I/O lines: 130 mA
  • DC Current for 3.3V Pin: 800 mA
  • DC Current for 5V Pin: 800 mA
  • Flash Memory: 512 KB all available for the user applications
  • SRAM: 96 KB (two banks: 64KB and 32KB)
  • Clock Speed: 84 MHz
  • Size:86.3×53.3mm


USE

1.Programming from USB on the board

To use this port, select "Arduino Due (Native USB Port)" as your board in the Arduino IDE. The USB(the one closest to the reset button) port is connected

directly to the SAM3X.Connect the USB port to your computer.

2.Programming from DUE Mini USB/Serial Adapter


DUE Mini 3.jpg


To use this port, select "Arduino Due (Programming Port)" as your board in the Arduino IDE. DUE Pro USB/Serial Adapter plug in the header to

Iduino DUE Pro board,and connect to your computer.


Documents:

programming wirelessly

Schematic:

EAGLE files:

Pin Mapping:

Arduino v1.5 Beta:

Arduino Page:


How to buy

Click here: http://www.geeetech.com/iduino-due-pro-board-with-due-pro-usbserial-adapter-p-655.html

http://www.geeetech.com/iduino-due-pro-board-completely-compatible-with-arduino-due-p-656.html