Difference between revisions of "Tutorials"

Latest revision as of 06:19, 29 November 2023

About 3D printer

- 3D Printing Basics
- how to printer with dual extruders
- Geeetech Rostock mini G2 & G2s pro Quick Starter Manual
- [[Alkaid needs more serious printing environment such as filter resin by the funnel with paper otherwise little precipitation will crack the printing screen and the fep release membrane is fragile which could be cracked broken by the precipitation after the printing head falls mechanically]]
- cura for single color .prusa slice for seperate colors. Easyprint Lite Release for gradient color and treble colors chitubox for Alkaid

Software

3D Printer Building Instruction

@@ Line 1: / Line 1: @@
-*3D printer assemble instruction<br>
+'''About 3D printer'''
+**[[3D Printing Basics]]
+**[[how to printer with dual extruders]]
+**[[Geeetech Rostock mini G2 & G2s pro Quick Starter Manual]]
+**[[Alkaid needs more serious printing environment such as filter resin by the funnel with paper otherwise little precipitation will crack the printing screen and the fep release membrane is fragile which could be cracked broken by the precipitation after the printing head falls mechanically]]
+**[[cura for single color .prusa slice for seperate colors.  Easyprint Lite Release for gradient color and treble colors  chitubox for Alkaid]]
+'''Software'''
+**[[Repetier-Host]]
+**[http://manual.slic3r.org/  Slic3r]
+**[https://ultimaker.com/en/support/software Cura]
+'''3D Printer Building Instruction<br>'''
+**[[Geeetech prusai 3 pro C building instruction]]
 **[[Acrylic Prusa I3 build instruction(8mm)]]
+**[[Assemble Manual of Geeetech Acrylic Prusa I3 (5mm)]]
+**[[Building Instructions of Geeetech Prusa I3 X]]
+**[[Building Instructions of Geeetech Prusa I3 M201]]
+**[[Delta Rostock mini G2 Building Instruction]]
+**[[Geeetech G2 & G2s pro Building instruction]]