Difference between revisions of "HM-TRLR-S Series 100mW LoRa Transceiver"
(Created page with "=Introduction= File:433,915transceiver.jpg HM-TRLR-S series is a low cost, high performance transparent transceiver operating at 433/915MHz. It is LoRa/FSK/GFSK/O...") |
(→Pin Description) |
||
| Line 36: | Line 36: | ||
=Pin Description= | =Pin Description= | ||
| − | + | ||
| + | [[File:433,915transceiver2 .jpg]] | ||
| + | |||
| + | PIN——Description | ||
| + | VCC—— Power supply,2.4-3.6V DC power, recommendation 3.3V DC power | ||
| + | TXD—— Data transmission | ||
| + | GND—— Ground | ||
| + | RXD—— Data receiving | ||
| + | CONFIG——Set low for configuration mode, while set high for communication | ||
| + | SLEEP——Set low for normal mode for data transceiver , while back to sleep if set high | ||
| + | STATUS——Disconnected | ||
| + | RESET——Reset trigger input, Active low | ||
| + | ANT—— Input/output interface with 50 ohm antenna | ||
| + | GND—— Ground | ||
Revision as of 06:31, 22 October 2014
Introduction
HM-TRLR-S series is a low cost, high performance transparent transceiver operating at 433/915MHz. It is LoRa/FSK/GFSK/OOK modulation variety. It features small size, high output power, high sensitivity, long transmission distance and most of the parameters can be set via the command. Receive and send data to automatically switch. Use generic UART interface. It is easy to realize the wireless data transmission if provided with the UART data. It is flexible for the users to set the parameters of UART baud rate, output power, data rate, frequency select, modulation mode select etc. It is your ideal choice for designing wireless data transmission products which can be widely used on wireless data transmission field.
Features
- Low cost, high performance, high reliability
- LoRa/FSK/GFSK/OOK modulation, 2-way half –duplex communication, strong anti-interfere
- 433/915MHz ISM band, globally license free.
- Maximal output power100mW(20dBm)， output power adjustable between 2-20dBm
- LORA Sensitivity -139dBm
- Supply current for Tx 130mA@20dBm, 35mA@13dBm
- Supply current for Rx 16mA
- Low current sleep mode 2uA
- Standard UART interface, extendable to RS232 or other interface
- Operation frequency can be configured, acceptable for several modules working in different frequency with no disturbance on each other.
- RF parameters as needed, users can be modulated by software.
- Easily use, auto exchange on communication & transceiver
- Communication speed 1.2kbps -115.2kbps，can be modulated through software
- Afford Sleep control signal，user self control work duty cycle
- With LED indicator
- Longer transmission distance，over 5Km in open air
- Small size 16*20*2mm，10PIN SMD package，easy for assembly .
- Tuning free
- Accord FCC, ETSI standard
Applications
- Remote control, remote measurement
- Data collection
- Wireless meter
- Access control
- IT household appliance
- Intelligence household appliance
- Identification system
Pin Description
PIN——Description VCC—— Power supply,2.4-3.6V DC power, recommendation 3.3V DC power TXD—— Data transmission GND—— Ground RXD—— Data receiving CONFIG——Set low for configuration mode, while set high for communication SLEEP——Set low for normal mode for data transceiver , while back to sleep if set high STATUS——Disconnected RESET——Reset trigger input, Active low ANT—— Input/output interface with 50 ohm antenna GND—— Ground
