Difference between revisions of "Metal J-head short-distance"
(→Feature) |
(→How to buy) |
||
| (One intermediate revision by the same user not shown) | |||
| Line 41: | Line 41: | ||
| Movement speed ||| 50cc | | Movement speed ||| 50cc | ||
|- | |- | ||
| − | | Outline dimensions ||| 70*25*25mm L/H/W | + | | Outline dimensions ||| 70*25*25mm L/H/W |
|- | |- | ||
| Weight ||| 68g | | Weight ||| 68g | ||
| Line 57: | Line 57: | ||
Click here to buy [http://www.geeetech.com/assembled-all-metal-shortdistance-jhead-for-bowden-extruder-p-791.html Metal J-head short-distance] | Click here to buy [http://www.geeetech.com/assembled-all-metal-shortdistance-jhead-for-bowden-extruder-p-791.html Metal J-head short-distance] | ||
| + | |||
| + | http://www.geeetech.com/all-metal-shortdistance-jhead-for-bowden-extruder-p-790.html | ||
Latest revision as of 05:42, 5 September 2014
Description
All metal enables working with Polycarbonate up to 300 degrees Celsius and with future materials that require higher working temperatures beyond those supported by plastic extruders and hot end. Tested with PLA, ABS, polycarbonate, nylon and PVA.
This product adopts high-quality aluminum alloy heat radiator and brass nozzle, with stainless steel pipe as feeding pipe, which ensures good heat insulation effect and prevents blockage. Besides, its surface is covered with anodic oxide coating, which can resist oxidation corrosion and increase nozzle hardness, thus ensuring better heat insulation, stronger corrosion resistance as well as finer and more stable printing.
Feature
Configurable cooling fan, cooling effect.Assembled short-distance J-head with fan for bowden extruder
Product Introduction
| Suitable raw material | PLA and ABS |
| Printing material | 1.75mm or 3mm ABS or PLA |
| Printing resolution | 0.1mm |
| Molding form | FDM |
| Material | Metal |
| Nozzle diameter | 0.3, 0.35, 0.4 , 0.5 optional |
| Printing thickness | 0.1mm-0.3mm |
| Nozzle temperature | 180℃-240℃ |
| Movement speed | 50cc |
| Outline dimensions | 70*25*25mm L/H/W |
| Weight | 68g |
| Input voltage | default to 12V |
| Heating voltage of extruding head | 12V |
| Thermistor | 100K 1% high-precision NTC Thermistor |
| Cartridge heater | 12V 30W |
How to buy
Click here to buy Metal J-head short-distance
http://www.geeetech.com/all-metal-shortdistance-jhead-for-bowden-extruder-p-790.html
