Difference between revisions of "Metal J-head long-distance"
(→How to buy) |
|||
| (4 intermediate revisions by the same user not shown) | |||
| Line 22: | Line 22: | ||
[[File:MJ-headLP.jpg | 400px]] [[File:MJ-headLFP.jpg | 400px]] | [[File:MJ-headLP.jpg | 400px]] [[File:MJ-headLFP.jpg | 400px]] | ||
| − | [[File:MYJ- | + | [[File:MYJ-headZZT1.jpg]] |
| − | + | [[File:MYJ-headZZT2.jpg]] | |
== Product Introduction == | == Product Introduction == | ||
| Line 47: | Line 47: | ||
| Movement speed ||| 50cc | | Movement speed ||| 50cc | ||
|- | |- | ||
| − | | Outline dimensions ||| 85*25*25mm L/H/W | + | | Outline dimensions ||| 85*25*25mm L/H/W |
|- | |- | ||
| Weight ||| 75g | | Weight ||| 75g | ||
| Line 59: | Line 59: | ||
| [http://www.geeetech.com/12v-30w-cartridge-wire-heater-heating-wire-p-804.html Cartridge heater] ||| 12V 30W | | [http://www.geeetech.com/12v-30w-cartridge-wire-heater-heating-wire-p-804.html Cartridge heater] ||| 12V 30W | ||
|} | |} | ||
| − | |||
== How to buy == | == How to buy == | ||
Click here to buy [http://www.geeetech.com/assembled-all-metal-longdistance-jhead-for-bowden-extruder-p-789.html Metal J-head long-distance] | Click here to buy [http://www.geeetech.com/assembled-all-metal-longdistance-jhead-for-bowden-extruder-p-789.html Metal J-head long-distance] | ||
| + | |||
| + | http://www.geeetech.com/all-metal-longdistance-jhead-for-bowden-extruder-p-784.html | ||
Latest revision as of 03:57, 5 September 2014
Description
The Bowden cable lets you reduce the moving mass of the extruder and thus allowing faster controlled motion, less shaking of your machine, less energy use and importantly: faster printing! Normally the mechanism that drives the filament into the hot end (where it melts) is directly on top of the extruder. This creates problems of balance and oscillations with faster motion which you can see in your printing results and hear and feel when your machine is shaking.
If the filament drive mechanism is placed on a non-moving part of the 3D printer, it can be pushed into a tube. PTFE (Teflon) is useful because it is slippery: it has little friction with the plastic.This limits wear and loss of energy. The tube's other end is connected to the extruder's hot-end.
The concept of using a Bowden cable as guide was suggested and pioneered by Ed Sells.
The main advantages
All metal enables working with Polycarbonate up to 300 degrees Celsius and with future materials that require higher working temperatures beyond those supported by plastic extruders and hot end. Tested with PLA, ABS, polycarbonate, nylon and PVA.
Configurable cooling fan, cooling effect Metal J-head long-distance
Product Introduction
| Suitable raw material | PLA and ABS |
| Printing material | 1.75mm or 3mm ABS or PLA |
| Printing resolution | 0.1mm |
| Molding form | FDM |
| Material | Metal |
| Nozzle diameter | 0.3, 0.35, 0.4 , 0.5 optional |
| Printing thickness | 0.1mm-0.3mm |
| Nozzle temperature | 180℃-240℃ |
| Movement speed | 50cc |
| Outline dimensions | 85*25*25mm L/H/W |
| Weight | 75g |
| Input voltage | default to 12V |
| Heating voltage of extruding head | 12V |
| Thermistor | 100K 1% high-precision NTC Thermistor |
| Cartridge heater | 12V 30W |
How to buy
Click here to buy Metal J-head long-distance
http://www.geeetech.com/all-metal-longdistance-jhead-for-bowden-extruder-p-784.html
