Difference between revisions of "Dual-head Hot End"
(→Description) |
(→Product Introduction) |
||
(3 intermediate revisions by the same user not shown) | |||
Line 31: | Line 31: | ||
| Movement speed ||| 50cc | | Movement speed ||| 50cc | ||
|- | |- | ||
− | | Outline dimensions ||| 100*65*72mm L/H/W | + | | Outline dimensions ||| 100*65*72mm L/H/W |
|- | |- | ||
| Weight ||| 240g | | Weight ||| 240g | ||
Line 39: | Line 39: | ||
| Heating voltage of extruding head ||| 12V | | Heating voltage of extruding head ||| 12V | ||
|- | |- | ||
− | | | + | | [http://www.geeetech.com/10pcs-100kohm-ntc-thermistors-for-jietai-hotend-p-836.html Thermistor] ||| 100K 1% high-precision NTC Thermistor |
|- | |- | ||
| [http://www.geeetech.com/12v-30w-cartridge-wire-heater-heating-wire-p-804.html Cartridge heater] ||| 12V 30W | | [http://www.geeetech.com/12v-30w-cartridge-wire-heater-heating-wire-p-804.html Cartridge heater] ||| 12V 30W | ||
|} | |} | ||
+ | |||
+ | == How to buy == | ||
+ | |||
+ | Click here to buy [http://www.geeetech.com/dualhead-hotend-extruder-0350405mm-nozzle-for-3mm-filament-p-749.html Dual-head Hotend Extruder] |
Latest revision as of 00:50, 23 June 2014
Description
Do you feel the printed module with single color too drab? Want to print a module of colors? This Dual-head Hot End Extruder will help you start you colorful 3D Printing.
"What is better, a single head extruder or dual head extruder?" - a question we have been asked on several occassions. The difference is very simple, while a single head extruder only holds one color filament, the other (dual head extrusion) can have two colors of filament. So honestly we think a dual head extruder is a preffered choice if you wish to make multi-colored 3D prints, but as it costs several hundred dollars more it is up you to decide how important multi-colored prints are.
If you are planning to use a 3D printer for art installations or making components then perhaps a single head extruder will work just fine. On the other hand, if you wish to make product prototypes or models with extra detail then multi-colored prints do give many objects, therefore a dual head extruder would be the prefered option. The dual head extruder just gives you that extra possibility of creating prints with more detail than if you were to use a single head extruder, for us that is definitly worth the extra amount.
Product Introduction
Suitable raw material | PLA and ABS |
Printing material | 1.75mm or 3mm ABS or PLA |
Printing resolution | 0.1mm |
Molding form | FDM |
Material | Metal |
Nozzle diameter | 0.3, 0.35, 0.4 , 0.5 optional |
Printing thickness | 0.1mm-0.3mm |
Nozzle temperature | 180℃-240℃ |
Movement speed | 50cc |
Outline dimensions | 100*65*72mm L/H/W |
Weight | 240g |
Input voltage | default to 12V |
Heating voltage of extruding head | 12V |
Thermistor | 100K 1% high-precision NTC Thermistor |
Cartridge heater | 12V 30W |
How to buy
Click here to buy Dual-head Hotend Extruder