Difference between revisions of "Hot End V2.0"

From Geeetech Wiki
Jump to: navigation, search
(Product Introduction)
(Product Introduction)
 
(10 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
== Description ==
 
== Description ==
  
The 2.0 version is a high performance hotend for use with RepRap and other 3D printers,making your printing even faster. The hot end comes completely assembled: wire it to your electronics and it is ready to print. It now includes an aluminum mount plate and aluminum heat sinks. The 2.0 also brings changes to the nozzle, heater block, and threaded extension with harder aluminum and revised thread profile for more reliable nozzle changes.
+
This [http://www.geeetech.com/reprap-hot-end-v20-with-035mm-04mm-nozzle-p-685.html HotEnd V2.0] is compatible (or adaptable) almost all known 3D printer.
 +
The [http://www.geeetech.com/reprap-hot-end-v20-with-035mm-04mm-nozzle-p-685.html HotEnd V2.0] version is a high performance hotend for use with RepRap and other 3D printers,making your printing even faster. The hot end comes completely assembled: wire it to your electronics and it is ready to print. It now includes an aluminum mount plate and aluminum heat sinks. The [http://www.geeetech.com/reprap-hot-end-v20-with-035mm-04mm-nozzle-p-685.html HotEnd V2.0] also brings changes to the nozzle, heater block, and threaded extension with harder aluminum and revised thread profile for more reliable nozzle changes.
  
 
[[File:HotEnd V2.0.jpg | 450px]]
 
[[File:HotEnd V2.0.jpg | 450px]]
Line 7: Line 8:
  
 
This product adopts Teflon and aluminum alloy heat radiator for heat dissipation and duralumin alloy nozzle. Its surface is covered with anodic oxide coating, which can resist oxidation corrosion and increase nozzle hardness. Since the heat-insulated pipe is designed with Teflon, the material will not soften easily, thus ensuring finer and more stable printing.
 
This product adopts Teflon and aluminum alloy heat radiator for heat dissipation and duralumin alloy nozzle. Its surface is covered with anodic oxide coating, which can resist oxidation corrosion and increase nozzle hardness. Since the heat-insulated pipe is designed with Teflon, the material will not soften easily, thus ensuring finer and more stable printing.
 
  
 
== Product Introduction ==
 
== Product Introduction ==
Line 13: Line 13:
 
{|border="1" cellspacing="0"
 
{|border="1" cellspacing="0"
 
|-
 
|-
| Suitable raw material ||| PLA and ABS  
+
| Suitable raw material ||| [http://www.geeetech.com/?main_page=index&cPath=83 PLA] and [http://www.geeetech.com/?main_page=index&cPath=83 ABS]
 +
|-
 +
| Printing material ||| 1.75mm or 3mm [http://www.geeetech.com/?main_page=index&cPath=83 ABS] or [http://www.geeetech.com/?main_page=index&cPath=83 PLA]
 
|-
 
|-
 
| Printing resolution ||| 0.1mm
 
| Printing resolution ||| 0.1mm
Line 21: Line 23:
 
| Material ||| Metal  
 
| Material ||| Metal  
 
|-
 
|-
| Nozzle diameter ||| optional,  0.3, 0.35, 0.4 & 0.5 optional  
+
| Nozzle diameter ||| [http://www.geeetech.com/03mm-nozzle-for-reprap-3d-printer-hotend-p-785.html 0.3], [http://www.geeetech.com/nozzle-035mm-m10aluminum-6063-for-3d-printer-hotend-extruder-p-697.html 0.35], [http://www.geeetech.com/04mm-nozzle-for-reprap-3d-printer-hotend-p-643.html 0.4] , [http://www.geeetech.com/05mm-nozzle-for-reprap-3d-printer-hotend-p-731.html 0.5] optional                      
 
|-
 
|-
 
| Printing thickness ||| 0.1mm-0.3mm
 
| Printing thickness ||| 0.1mm-0.3mm
Line 29: Line 31:
 
| Movement speed               ||| 50cc
 
| Movement speed               ||| 50cc
 
|-
 
|-
| Outline dimensions ||| 66*70*40mm L/H/W)         
+
| Outline dimensions ||| 66*70*40mm L/H/W          
 
|-
 
|-
 
| Weight ||| 120g  
 
| Weight ||| 120g  
Line 37: Line 39:
 
| Heating voltage of extruding head              ||| 12V  
 
| Heating voltage of extruding head              ||| 12V  
 
|-
 
|-
| Thermisto ||| 100K 1% high-precision NTC Thermistor
+
| [http://www.geeetech.com/10pcs-100kohm-ntc-thermistors-for-jietai-hotend-p-836.html Thermistor] ||| 100K 1% high-precision NTC Thermistor
 
|-
 
|-
|Cartridge heater ||| 12V 30W
+
| [http://www.geeetech.com/12v-30w-cartridge-wire-heater-heating-wire-p-804.html Cartridge heater] ||| 12V 30W
 
|}
 
|}
 +
 +
== How to buy ==
 +
 +
Click here to buy [http://www.geeetech.com/reprap-hot-end-v20-with-035mm-04mm-nozzle-p-685.html HotEnd V2.0]

Latest revision as of 00:49, 23 June 2014

Description

This HotEnd V2.0 is compatible (or adaptable) almost all known 3D printer. The HotEnd V2.0 version is a high performance hotend for use with RepRap and other 3D printers,making your printing even faster. The hot end comes completely assembled: wire it to your electronics and it is ready to print. It now includes an aluminum mount plate and aluminum heat sinks. The HotEnd V2.0 also brings changes to the nozzle, heater block, and threaded extension with harder aluminum and revised thread profile for more reliable nozzle changes.

HotEnd V2.0.jpg


This product adopts Teflon and aluminum alloy heat radiator for heat dissipation and duralumin alloy nozzle. Its surface is covered with anodic oxide coating, which can resist oxidation corrosion and increase nozzle hardness. Since the heat-insulated pipe is designed with Teflon, the material will not soften easily, thus ensuring finer and more stable printing.

Product Introduction

Suitable raw material PLA and ABS
Printing material 1.75mm or 3mm ABS or PLA
Printing resolution 0.1mm
Molding form FDM
Material Metal
Nozzle diameter 0.3, 0.35, 0.4 , 0.5 optional                      
Printing thickness 0.1mm-0.3mm
Nozzle temperature 180℃-240℃
Movement speed                50cc
Outline dimensions 66*70*40mm L/H/W        
Weight 120g
Input voltage default to 12V
Heating voltage of extruding head              12V
Thermistor 100K 1% high-precision NTC Thermistor
Cartridge heater 12V 30W

How to buy

Click here to buy HotEnd V2.0