Difference between revisions of "Mini2440"
From Geeetech Wiki
(→Mini2440 | S3C2440 ARM9 Board) |
(→Specification) |
||
| Line 5: | Line 5: | ||
==Specification== | ==Specification== | ||
| + | *Dimension: 100 x 100 mm | ||
| + | *CPU: 400 MHz Samsung S3C2440A ARM920T (max freq. 533 MHz) | ||
| + | *RAM: 64 MB SDRAM, 32 bit Bus | ||
| + | *Flash: 64 MB / 128 MB / 256 MB / 1GB NAND Flash and 2 MB NOR Flash with BIOS | ||
| + | *EEPROM: 256 Byte (I2C) | ||
| + | *Ext. Memory: SD-Card socket | ||
| + | *Serial Ports: 1x DB9 connector (RS232), total: 3x serial port connectors | ||
| + | *USB: 1x USB-A Host 1.1, 1x USB-B Device 1.1 | ||
| + | *Audio Output: 3.5 mm stereo jack | ||
| + | *Audio Input: Connector + Condenser microphone | ||
| + | *Ethernet: RJ-45 10/100M (DM9000) | ||
| + | *RTC: Real Time Clock with battery | ||
| + | *Beeper: PWM buzzer | ||
| + | *Camera: 20 pin (2.0 mm) Camera interface | ||
| + | *LCD Interface: 41 pin (1.0 mm) connector for FriendlyARM Displays and VGA Board | ||
| + | *Touch Panel: 4 wire resistive | ||
| + | *User Inputs: 6x push buttons and 1x A/D pot | ||
| + | *User Outputs: 4x LEDs | ||
| + | *Expansion: 40 pin System Bus, 34 pin GPIO, 10 pin Buttons (2.0 mm) | ||
| + | *Debug: 10 pin JTAG (2.0 mm) | ||
| + | *Power: regulated 5V (DC-Plug: 1.35mm inner x 3.5mm outer diameter) | ||
| + | *Power Consumption: Mini2440: 0.3 A, Mini2440 + 3.5" LCD: 0.6 A, Mini2440 + 7" LCD: 1 A | ||
| + | *OS Support | ||
| + | *Windows CE 5 and 6 | ||
| + | *Linux 2.6 | ||
| + | *Android | ||
| + | |||
==Board== | ==Board== | ||
Revision as of 02:32, 13 December 2011
Mini2440 | S3C2440 ARM9 Board
FriendlyARM Mini 2440 SBC (Single-Board Computer) with 400 MHz Samsung S3C2440 ARM9 processor. The board measures 100 x 100 mm, ideal for learning about ARM9 systems.
Specification
- Dimension: 100 x 100 mm
- CPU: 400 MHz Samsung S3C2440A ARM920T (max freq. 533 MHz)
- RAM: 64 MB SDRAM, 32 bit Bus
- Flash: 64 MB / 128 MB / 256 MB / 1GB NAND Flash and 2 MB NOR Flash with BIOS
- EEPROM: 256 Byte (I2C)
- Ext. Memory: SD-Card socket
- Serial Ports: 1x DB9 connector (RS232), total: 3x serial port connectors
- USB: 1x USB-A Host 1.1, 1x USB-B Device 1.1
- Audio Output: 3.5 mm stereo jack
- Audio Input: Connector + Condenser microphone
- Ethernet: RJ-45 10/100M (DM9000)
- RTC: Real Time Clock with battery
- Beeper: PWM buzzer
- Camera: 20 pin (2.0 mm) Camera interface
- LCD Interface: 41 pin (1.0 mm) connector for FriendlyARM Displays and VGA Board
- Touch Panel: 4 wire resistive
- User Inputs: 6x push buttons and 1x A/D pot
- User Outputs: 4x LEDs
- Expansion: 40 pin System Bus, 34 pin GPIO, 10 pin Buttons (2.0 mm)
- Debug: 10 pin JTAG (2.0 mm)
- Power: regulated 5V (DC-Plug: 1.35mm inner x 3.5mm outer diameter)
- Power Consumption: Mini2440: 0.3 A, Mini2440 + 3.5" LCD: 0.6 A, Mini2440 + 7" LCD: 1 A
- OS Support
- Windows CE 5 and 6
- Linux 2.6
- Android
