Difference between revisions of "Crazyradio"
From Geeetech Wiki
(Created page with "1.Introduction 2.Features == Introduction == The Crazyradio is a 2.4 GHz radio USB dongle. Currently it's only used to communicate with the Crazyflie Nano Quadcopte...") |
|||
Line 8: | Line 8: | ||
== Features == | == Features == | ||
+ | |||
+ | *Based on the nRF24LU1+ 2.4 GHz SoC from Nordic Semiconductor | ||
+ | *USB bootloader enables firmware upgrades via USB | ||
+ | *Can be used as stand-alone module with RC controller via expansion header. Supports 12V PPM input and power supply. Note: There's still no firmware to support this *feature but it's under development | ||
+ | *Comes with GPLv3 firmware developed fully by Bitcraze from datasheet and a build environment that allows you to develop your own firmware | ||
+ | *Programmable via SPI using expansion header |
Revision as of 02:05, 20 November 2013
Introduction
The Crazyradio is a 2.4 GHz radio USB dongle. Currently it's only used to communicate with the Crazyflie Nano Quadcopter but it can be adopted to work with a number of applications that are based on the low-cost 2.4 GHz chips from [1]
Features
- Based on the nRF24LU1+ 2.4 GHz SoC from Nordic Semiconductor
- USB bootloader enables firmware upgrades via USB
- Can be used as stand-alone module with RC controller via expansion header. Supports 12V PPM input and power supply. Note: There's still no firmware to support this *feature but it's under development
- Comes with GPLv3 firmware developed fully by Bitcraze from datasheet and a build environment that allows you to develop your own firmware
- Programmable via SPI using expansion header