Difference between revisions of "Opto-isolator Breakout"
From Geeetech Wiki
(→introduction) |
(→introduction) |
||
| Line 1: | Line 1: | ||
==introduction== | ==introduction== | ||
| − | [[File:Opto-isolator Breakout09118.jpg| | + | [[File:Opto-isolator Breakout09118.jpg|300px]] |
This is a board designed for opto-isolation. This board is helpful for connecting digital systems (like a 5V microcontroller) to a high-voltage or noisy system. | This is a board designed for opto-isolation. This board is helpful for connecting digital systems (like a 5V microcontroller) to a high-voltage or noisy system. | ||
Revision as of 06:57, 19 January 2013
introduction
This is a board designed for opto-isolation. This board is helpful for connecting digital systems (like a 5V microcontroller) to a high-voltage or noisy system.
This board electrically isolates a controller from the high-power system by use of an opto-isolator IC. This IC has two LEDs and two photodiodes built-in.
This allows the low-voltage side to control a high voltage side.
Features
- Two channel coupler
- SOIC-8 surface mountable package
- Standard lead spacing of 0.05"
- Available only on tape and reel option(conforms to EIA standard 481-2)
- Isolation test voltage, 4000 VRMS
- Compatible with dual wave, vapor phase andIR reflow soldering
- Lead (Pb)-free component
- Component in accordance to RoHS 2002/95/EC andWEEE 2002/96/EC
