|
|
| (9 intermediate revisions by the same user not shown) |
| Line 1: |
Line 1: |
| − | | + | *[[Tiny210 Overview]] |
| − | == Overview ==
| + | *[[Tiny210 Hardware Specification]] |
| − | [[File:Tiny210overview.jpg]] | + | *[[Creating the SD boot card]] |
| − | * 1GHz Samsung S5PV210 with PowerVR SGX540 graphics engine | + | *[[System Installing]] |
| − | * 512MB DDR2 RAM and 1GB NAND Flash
| |
| − | * LCD/Touch Screen, HDMI,TV out, Audio support
| |
| − | * TF card, USB Host/OTG support
| |
| − | * Ethernet, WiFi, serial port, GPIO
| |
| − | * Contain CPU board
| |
| − | * Linux 2.6.35 & Android 2.3 support
| |
| − | | |
| − | == CPU board Hardware info ==
| |
| − | [[File:Cpu top.jpg]] [[File:Cpu bottom.jpg]] | |
| − | | |
| − | '''CPU''': 1 GHz Samsung S5PV210 with PowerVR SGX540 graphics engine<br>
| |
| − | '''DDR2 RAM''': 512MB DDR2 RAM, 32bit data bus, 200MHz<br>
| |
| − | '''FLASH''': SLC NAND Flash: 256MB/1GB
| |
| − | | |
| − | '''Multi-IO''':
| |
| − | 2 x 60 Pin 2.0mm space DIP connector<br>
| |
| − | 1 x 30 Pin 2.0mm space DIP connector<br>
| |
| − | 1 x 51 Pin 1.0mm space SMD connector
| |
| − | | |
| − | '''on Board''':
| |
| − | HDMI interface
| |
| − | 4 x User Leds(Green)<br>
| |
| − | 1 x Power Led(Red)<br>
| |
| − | Supply Voltage from 2V to 6V
| |
| − | | |
| − | '''Mechanical''': Dimension: 64x 50x 11mm
| |
| − | | |
| − | '''Software''': Android 4.0, Android 2.3, Linux 2.6.35, Qtopia-2.2.0/Qt-4.4.3/Qt-4.7
| |
| − | | |
| − | == Tiny210 Motherboard ==
| |
| − | [[File:Tiny210motherboard.png]] | |
| − | # Integrated USB 2.0 Hub: Extended 4 USB host ports, three of them as the standard side port,and one was lead by SCON interface
| |
| − | # AV CCD Camera In: Integrated TVP5150 video chip: 2 AV input port (RCA), can be directly connected using a CCD camera
| |
| − | # RS485: 1 RS485 interface
| |
| − | # Serial Port: 4 serial port, two of them have been converted to RS232, and leads through the DB9 Block (COM0, COM1), through the CON1, 2, 3, 4, Block leads to TTL level
| |
| − | # keys: 8 key
| |
| − | # RJ45 Ethernet port: using DM9000AEP, 10/100M adaptive
| |
| − | # Audio input and output: using the WM8960 professional audio chip, containing Class D amplifier on-board microphone, and supports HDMI audio and video synchronization output
| |
| − | # USB Slave: 1 Road, the USB 2.0 specification
| |
| − | # Infrared receiver: 1
| |
| − | # ADC input: 6 ADC input
| |
| − | # Buzzer: 1, control by the PWM0
| |
| − | # EEPROM:AT24C08 (256 Byte) for I2C test
| |
| − | # LCD Interface: 2 LCD interface, both 40 Pin 0.5mm Pitch Chip Block, support 3.5 "-19" full color TFT display LCD
| |
| − | # SDIO interface: used to connect the SDWiFi module and other
| |
| − | # CMOS Camera interface: used to connect CMOS camera
| |
| − | # RTC clock: with a backup battery (according to different regions or time periods, mailing may remove the battery)
| |
| − | # PCB layer: 2
| |
| − | # PCB size: 180 x 130mm, can be easily fixed all kinds of LCD modules, especially the 7-inch LCD module
| |
| − | # Power supply: DC-5V
| |
| − | | |
| − | == Software ==
| |
| − | '''Linux&Android 2.3'''
| |
| − | *Boot loader
| |
| − | verison: Superboot-210<br>
| |
| − | Function: support boot and update system by TF-card(superboot)
| |
| − | *Linux kernel
| |
| − | verison: Linux-2.6.35<br>
| |
| − | Compile: arm-linux-gcc-4.5.1-v6-vfp
| |
| − | *Device Driver
| |
| − | TFT LCD/Touchscreen, HDMI, Audio OUT, MMC/SD card, NET, Serial port, watchdog,RTC, keyboard<br>
| |
| − | WIFI, USB Host/Device, FIMC/JPEG/MFC/3D/2D, Camera, 3Gdriver
| |
| − | *File Systemsupport
| |
| − | Ubi filesystem, yaffs, ext2/3,
| |
| − | *Function use example
| |
| − | Ethernet, Support DHCP, Audio in/out, SD WiFi support, HDMI support<br>
| |
| − | OMS Camera support, 3G support(WCDMA, CDMA2000)<br>
| |
| − | USB Disk support, USB Bluetooth support, Switch horizontal and vertical screen<br>
| |
| − | Dynamic Wallpapers
| |
| − | | |
| − | | |
| − | | |
| − | '''Linux'''
| |
| − | *Boot loader
| |
| − | verison: Superboot-210<br>
| |
| − | Function: support boot and update system by TF-card(superboot)
| |
| − | *Linux kernel
| |
| − | verison: Linux-2.6.35<br>
| |
| − | Compile: arm-linux-gcc-4.5.1-v6-vfp
| |
| − | *Device Driver
| |
| − | TFT LCD/Touchscreen, HDMI, Audio OUT, MMC/SD card, NET, Serial port, watchdog,RTC, keyboard<br>
| |
| − | WIFI, USB Host/Device, FIMC/JPEG/MFC/3D/2D, Camera, 3Gdriver<br>
| |
| − | *File Systemsupport | |
| − | Ubi filesystem, yaffs, ext2/3
| |
| − | *Graphics system
| |
| − | Qtopia-2.2.0/Qt-4.4.3/Qt-4.7
| |
| − | | |
| − | [[File:Sys overview1.jpg|500px]][[File:Sys overview2.jpg|500px]] | |
| − | | |
| − | == How to buy ==
| |
| − | [http://www.geeetech.com/1g-tiny210-sds5pv210-cortexa8-7-tft-lcd-sdk-p-422.html Tiny 210]
| |
