Difference between revisions of "Gas Sensor - MQ-2"

From Geeetech Wiki
Jump to: navigation, search
(Specification)
Line 26: Line 26:
 
Measuring voltage: ≤ 24V
 
Measuring voltage: ≤ 24V
 
Working conditions of ambient temperature: -20 ℃ ~ +55 ℃
 
Working conditions of ambient temperature: -20 ℃ ~ +55 ℃
                      Humidity: ≤ 95% RH
+
Humidity: ≤ 95% RH
                      Environmental oxygen content: 21%
+
Environmental oxygen content: 21%
 
Storage conditions Temperature: -20 ° C to +70 ° C
 
Storage conditions Temperature: -20 ° C to +70 ° C
                      Humidity: ≤ 70% RH
+
Humidity: ≤ 70% RH
 
 
  
 
==document==
 
==document==

Revision as of 06:28, 10 May 2012

Introduction

MQ-2 1.jpg

Arduino MQ-2 gas sensor module are used in gas leakage detecting equipments in family and industry, are suitable for detecting of LPG, i-butane, propane, methane ,alcohol, Hydrogen, smoke.

Features: Wide detecting scope
Fast response and High sensitivity
Stable and long life
Simple drive circui

Specification

MQ-2 0.jpg

Detection range: 300 to 10000ppmm The characteristics gas: 1000ppmm, isobutane Sensitivity: R in air / Rin, typical gas ≥ 5 Sensing Resistance: 1KΩ 50ppm toluene to 20KΩ in. Response time: ≤ 10s Recovery time: ≤ 30s Heat resistance: 31Ω ± 3Ω Heating current: ≤ 180mA Heating voltage: 5.0V ± 0.2V Heating power: ≤ 900mW Measuring voltage: ≤ 24V Working conditions of ambient temperature: -20 ℃ ~ +55 ℃ Humidity: ≤ 95% RH Environmental oxygen content: 21% Storage conditions Temperature: -20 ° C to +70 ° C Humidity: ≤ 70% RH

document

[MQ-2 datasheet]

Usage

MO-2 2.jpg

How to buy it

Click here to buy [Gas Sensor - MQ-2]