Metal J-head V2.0 long-distance

From Geeetech Wiki
Revision as of 02:54, 14 September 2024 by Admin (talk | contribs) (How to buy)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Description

MJ-headV2.0L1.jpgMJ-headV2.0L2.jpg

This product adopts high-quality aluminum alloy heat radiator and brass nozzle, with stainless steel pipe as feeding pipe, which ensures good heat insulation effect and prevents blockage. Its surface is covered with anodic oxide coating, which can resist oxidation corrosion and increase nozzle hardness and surface area of heat radiator. Besides, the cooling fan directly faces to operation area. All such special designs ensure better heat insulation as well as finer and more stable printing.


700

MJ-headV2.0L4.jpg

Assembled with 40x40x15mm 12VDC cooler fan

Product Introduction

Suitable raw material PLA and ABS
Printing material 1.75mm or 3mm ABS or PLA
Printing resolution 0.1mm
Molding form FDM
Material Metal
Nozzle diameter 0.3, 0.35, 0.4 , 0.5 optional                      
Printing thickness 0.1mm-0.3mm
Nozzle temperature 180℃-240℃
Movement speed                50cc
Outline dimensions 84*43*58mm L/H/W        
Weight 140g
Input voltage default to 12V
Heating voltage of extruding head              12V
Thermistor 100K 1% high-precision NTC Thermistor
Cartridge heater 12V 30W

The product has been discontinued, if there are any related questions, please contact: support@geeetech.com

How to buy

The product has been discontinued, if there are any related questions, please contact: support@geeetech.com