View source for Tiny6410 Hardware Specification

==Tiny6410 core board interface instruction==

Tiny 6410 is a embedded development board based on ARM11 (SUMSUNG S3C6410). The S3C6410 is designed based on ARM1176JZF-S core integrates powerful multi-media processing unit, supports Mpeg4, H.264/H.263, etc video hardware decoding and encoding and outputs to LCD an TV.It includes 3D graphical hardware accelerator for OpenGL ES1.1&2.0 accelorated rendering, in addition, it also supports 2D graphic smooth zooming and inverting.<br>

Tiny6410 is designed with high-density 6-layer PCB which integrates 128M/256M RAM, SLC NAND Flash(256M/1GB) or MLC NAND FlASH(2GB) memory. The dimension is 64 x 50mm, powered by 5 supply. The board also integrates the CPU voltage convertor and professional reset chip. The 2.0mm pitch headers draw out the common intefaces for the secondary development of the developers who doesn't want to design the CPU board. <br>

Tiny6410SDK is a bottom board refer to the Tiny6410 core-board, it helps the developers for the  function verification and extensive development. This bottom board includes 3 LCD interfaces and 4-wire touch screen interface, 100M standard Ethernet interface, standard DB9 interface, MiniUSB2.0 interface, USB Host1.1, 3.5mm audio output, standard TV-OUT interface, SD card interface, IR receiver and etc. Also it draw out 4 channel TTL serial port, 1 channel TV-OUT, SDIO2 interface(connect to SD Wifi).It also have buzzer, I2C-EEPROM, spare battery, AD variable resistor, 8 interrupt buttons.<br>

We consider to fix the common LCD module on the bottom board such as 3.5", 4.3 TFT, 7"TFT LCD and etc for user's convenience so that they won't mess wires up the wires.<br>

We also make use of the feature of SD card booting of 6410. Just copying the object files to the SD card(up to 32G), without connecting to the computer, you can install any embedded system(windowsCE6/Linux/Android/Ununtu/uCOS/2) easily in our development board or run the system with SD card.<br>

==Tiny6410 CPU board==
===Feature of the Tiny6410 CPU board===

[[File:Tiny6410 hardware 1.jpg]]

[[File:Tiny6410 hardware 2.jpg]]

[[File:Tiny6410 hardware 3.jpg]]



===Pin definition of the Tiny6410 CPU board===
Tiny6410 CPU board use the 2.0mm pitch double pin, leads to a total of 4 groups:
P1, P2, CON1, CON2.<br>

P1 and P2 are each 60 Pin; CON1 and CON2 are each 30Pin, leads to a total of 180
Pin.The follow shown is the layout description:


[[File:Tiny6410 hardware 4.jpg]]

[[File:Tiny6410 hardware 5.jpg]]

[[File:Tiny6410 hardware 6.jpg]]

[[File:Tiny6410 hardware 7.jpg]]

===Dimensions of the Tiny6410 CPU board===
[[File:Tiny6410 hardware 8.jpg]]

==Mother board==
[[File:Tiny6410 hardware 9.jpg]]

===Feature of the Tiny6410 SDK board===

[[File:Tiny6410 hardware 10.jpg]]

[[File:Tiny6410 hardware 11.jpg]]

[[File:Tiny6410 hardware 12.jpg]]

==Interface==
===Power In===
The board use 5V power supply, it have two method to power the board. One is the
D-jack (CN1)power in,the others is 4Pin header(CON8).

[[File:Tiny6410 hardware 13.jpg]]

===Serial port===
S3C6410 have four serial port, it is UART0,1,2,3, UART1 is 5-wired serial, the others is 3-wired serial.In Tiny6410SDK board, COM0,1,2 was linked to DB9 interface in RS232, you can
link it to PC.And the all serial was linked from the board to CON1, CON2, CON3, CON4 in TTL.

[[File:Tiny6410 hardware 14.jpg]]

===USB interface===
In Tiny6410 board, it have 5 usb interface, there are 4 usb host, and the other is usb
slave interface

[[File:Tiny6410 hardware 15.jpg]]

[[File:Tiny6410 hardware 16.jpg]]

===SCON interface===
In order to use more serial port peripherals, we deliberately designed the SCON interface and call it"serial port Center, "which includes two serial ports, an I2C interface, an SPI interface, a USB Host port, but also Have a GPIO port, etc., and includes 5V and 3.3V power supply output pin, as shown in Figure (right side interface mechanical dimensions SCON):


[[File:Tiny6410 hardware 17.jpg]]


===Network interface===
the board carries a 100M network card interface, use the DM9000 chips.

===Audio interface===

[[File:Tiny6410 hardware 18.jpg]]


===TV-out interface===
The board provide 1 TV-out interface, it is from DACOUT0.
When you use DACOUT0, you should set the TV mode for CVBS mode.

===JTAG===

[[File:Tiny6410 hardware 19.jpg]]


===LED===
The board have 4 LED, you can control it, When output GPIO for 0, the LED will be
light.

[[File:Tiny6410 hardware 20.jpg]]


===Key===
The board have 8 user key, and it can be linked for GPIO(CON12).

[[File:Tiny6410 hardware 21.jpg]]

===LCD interface===
The board have 3 LCD interface, it have the same signal, LCD1 and LCD2 is the 40pin 0.5mm pitch
interface, LCD3 is the 40pin 2.0mm interface.

[[File:Tiny6410 hardware 22.jpg]]

[[File:Tiny6410 hardware 23.jpg]]



===ADC input===
The board have 2 Chanel A/D, AIN0 was linked to W1, it can be configure 10/12 bit.

===PWM(buzzer)===
The Buzzer in the board was controlled by PWM, it is PWM0(GPF14)

[[File:Tiny6410 hardware 24.jpg]]


===temperature sensor===

[[File:Tiny6410 hardware 25.jpg]]


===IR===
In the board, it have IR, the name is IRM3638, It link to the pin EINT12 as received
pins.


[[File:Tiny6410 hardware 26.jpg]]

===I2C-EEPROM===
The I2C was linked to EEPROM, AT24C08, it was 256byte. only for test the I2C.

===SD card slot===
It have a SD card slot, can support 32GByte

===SDIO-II/SD-WiFi interface===
The SDIO was linked to CON11, it also contain 1 SPI, 1 I2C, 4 GPIO.

[[File:Tiny6410 hardware 27.jpg]]