Amarnath Mandir is one among the four major pilgrimages of India, and flock of devotees trek through the south Kashmir Himalayas to the Holy Cave Shrine of Shri Amarnathji every year. The temple is opened for devotees only during summers, in the month of July to August. People rush to see the Ice image of Lord Shiva that is formed in the shape of a Lingam - stalagmite. The image incredibly waxes and wanes with the sight of Moon. People of Hindu faith in India consider this religious journey as one of the major tasks of their life that can fairly show them the path to heaven. This year the Yatra was started on 28th of June and it will end on 26th of August that is for 2 months. 1500 pilgrims are allowed per day and they should fall in the age of 14 to 74 years. Read about the Nitty gritty of the Shri Amarnath Cave Temple before planning your visit.
One of the most sacrosanct places in India as considered by the followers of Hindu religion, Amarnath temple is dedicated to worshipping Lord Shiva. It is located in the state of Jammu and Kashmir at a height of about 12,760 feet. Devotees visit the Amarnath cave every year for getting a pious glimpse of Lingam of Lord Shiva which is believed to be formed naturally from ice. The temple is only accessible for a short duration during the year in the month of July to August, when the ice Lingam is formed. The scene during the time is absolutely unbelievable and that makes people to believe in the sanctity of the place. From the top of the cave, water slowly trickles down which freezes to form ice, which after forming a solid base starts taking the shape of Shiva lingam and it acquires the complete shape on Purnima. It’s been mentioned in Hindu scriptures that Lord Shiva explained to his beloved wife, Parvati the secret of life. There is much more to know about the temple and its sacred story.
Amarnath Mandir
-
- Posts: 7
- Joined: Mon Feb 28, 2022 12:43 am
Jump to
- Update Announcement/Product Release
- Firmware
- 3D Printer
- ↳ Thunder
- ↳ Mizar Pro
- ↳ Mizar S
- ↳ Mizar
- ↳ Geeetech I3/DIY Printer Series
- ↳ FAQ-Geeetech I3/DIY Printer series
- ↳ Geeetech I3 Pro B
- ↳ Geeetech I3 Pro W
- ↳ Geeetech I3 Pro X
- ↳ Geeetech I3 Aluminum
- ↳ Geeetech I3 Aluminum Pro
- ↳ Geeetech I3 Duplicator 5
- ↳ Geeetech I3 Pro C
- ↳ Geeetech I3 M201
- ↳ Geeetech A10 Series
- ↳ A10T
- ↳ Geeetech A20 Series
- ↳ Geeetech A20
- ↳ Geeetech A20M
- ↳ A20T
- ↳ Geeetech A30 Series
- ↳ A30M
- ↳ A30 PRO
- ↳ Geeetech E180 Mini
- ↳ Geeetech MeCreator2
- ↳ GiantArm D200
- ↳ Geeetech Delta Series
- ↳ Geeetech DP200 Series
- 3D Printing Software
- ↳ Configuration Profiles Sharing
- ↳ Software
- ↳ Wifi Box
- ↳ Bug report
- ↳ Download
- Hardware
- ↳ 3D Printer Hardware
- ↳ Stepper Motor
- ↳ Control Board
- ↳ Extruder
- ↳ Hot bed
- ↳ LCD Panel
- ↳ Power Supply Unit
- ↳ Assembly
- ↳ Others
- ↳ Video about cleaning and replacing nozzles
- Print Quality
- Resoures Sharing
- Feedback&Suggestion
- Project Talent Show
- Other Discussion
- ↳ Leveling Guide
- ↳ Open Hardware
- ↳ Mods And Hacks
- ↳ Products FAQ
- ↳ Tips & Tricks
- ↳ Discuss & Help
- ↳ Windows
- ↳ MAC