Y movement changes during print!!

Post Reply
sirikonta
Posts: 3
Joined: Fri Jan 21, 2022 2:03 pm

Y movement changes during print!!

Post by sirikonta » Mon Jan 31, 2022 5:00 pm

My prints start good but after a short time the Y motor clicks and misses steps meaning that the y direction is about halved. The stepper functions well at the start but after about a minute jumps into this click and missing step routine. Can any one help 10.0.0.0.1 192.168.1.254?
Top
Post Reply

Return to “Stepper Motor”