A30T Model Order Triple Color

[chuckthetekkie]

Is there a way to tell my A30T the order of the model to print each layer? I have a 2D figure that has an outline which I want printed first and then the inside with a different color and then the last model.

I want each layer to print in the following order:

1. Outline
2. Figure inside
3. Figure's rosy cheeks.

Is that possible using any slicer?

[Admin]

Hello, the printer can only print layer by layer, not what you said.

[KamsanYoun]

Is there a way to tell my A30T the order of the model to print each layer? I have a 2D figure that has an outline which I want printed first and then the inside with a different color and then the last model.

I want each layer to print in the following order:

1. Outline
2. Figure inside
3. Figure's rosy cheeks. omegle xender


Is that possible using any slicer?

I can get this for a good deal right now, sub $300. I don't need to print this large very often, but overall what are the thoughts on this vs what else?

Does it actually have an all metal hotend, is it going to be a pain or is it pretty straightforward? I currently have an a10, but I got it used and its in rougher shape than I realized