A20M wrong direction of retraction

Post Reply
TomDed
Posts: 4
Joined: Fri May 15, 2020 3:26 am

A20M wrong direction of retraction

Post by TomDed » Mon Oct 05, 2020 2:14 am

A20M - brand new. BLtouch added. Checked with firmware 1.8 and 2.0 The same issue. The extruder makes retraction in the wrong direction.
Slicer Cura 4.7 and Kisslicer 1.6 - the same behavior.
Visible on 20s and 40s
https://youtu.be/fXLVYGxboNk
Top
Post Reply

Return to “Geeetech A20M”