Cura 4.7

[JeeperDarren]

I "upgraded" to Cura 4.7 yesterday and I lost all my settings, even after I told Cura to save those settings.

The problem is that I was still trying to adjust everything because the I3 series is not an option after downloading the profiles from here.

cura.png (5.56 KiB) Viewed 4591 times

I downloaded it from the FAQ linked in this very board, so I am a little fustrated that the image I see does not match the images in the FAQ. I have owned this printer for 2 years and I have really never gotten it to print nicely. The Pro B mostly collects dust.

My Printrbot Metal Black gives me better quality prints right now and I don't feel that should be the case.

Someone else built my printer for me, so I know I need to learn some of the quirks of this machine, but it would be nice to have a base configuation to start from.

Is there a cura profile for this machine, or do I need to pick one of the ones listed and go from there again?

[William]

Hello, geeetech series printers have almost no difference in the configuration of cura. You can try to print with the configuration of a series to see how the printing effect is.

[JeeperDarren]

Yeah, I went with the Pro C settings.

It took a while to figure out why the prints were off-center.

[LoBoHEAT]

Off centre it´s normal, you need to define the offset of X and Y axis, for example mine are X= -12 Y= 0. and perfect center prints.

Best regards.