A10 with GT2560 v3.1 - Question about fan voltages

Post Reply
bornlivedie
Posts: 3
Joined: Tue Feb 04, 2020 7:11 am

A10 with GT2560 v3.1 - Question about fan voltages

Post by bornlivedie » Wed Mar 25, 2020 2:44 pm

I'm planning to change the stock fan for a beefier 24v fan, but my question is, do the fans run at 24v or 12v?

I have the A10 with the GT2560 v3.1 board.

Thanks!
Top
User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: A10 with GT2560 v3.1 - Question about fan voltages

Post by William » Wed Mar 25, 2020 2:47 pm

Hi, your motherboard supports 24V.
-Keep your mind and try to test it. :)
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Top
bornlivedie
Posts: 3
Joined: Tue Feb 04, 2020 7:11 am

Re: A10 with GT2560 v3.1 - Question about fan voltages

Post by bornlivedie » Wed Mar 25, 2020 8:24 pm

William wrote: ↑
Wed Mar 25, 2020 2:47 pm
 Hi, your motherboard supports 24V.
Thank you, William. I know the PSU is 24v and that the motherboard allows it, but, does it take advantage of that out of the box? I know the old boards didn't and you had to jump two points for fans to work at 24v.

Thanks!
Top
bornlivedie
Posts: 3
Joined: Tue Feb 04, 2020 7:11 am

Re: A10 with GT2560 v3.1 - Question about fan voltages

Post by bornlivedie » Sat Mar 28, 2020 8:44 am

Neverwind, I just measured the voltage with a multimeter. I can confirm it runs at 24v.
Top
Post Reply

Return to “Geeetech A10 Series”