Thin extrusion on one side of bed

Post Reply
evant8950
Posts: 9
Joined: Thu Dec 26, 2019 2:56 am

Thin extrusion on one side of bed

Post by evant8950 » Thu Dec 26, 2019 3:00 am

Hey Everyone

I cannot figure out what is wrong. Everything I have tried to print the right side of the bed always has thinner first layer. I have the 3D Touch installed for bed leveling. See the attached picture of a primer line.
Attachments
A21B8F30-702F-4447-8E3A-591D380C3808.jpeg
A21B8F30-702F-4447-8E3A-591D380C3808.jpeg (570.8 KiB) Viewed 2742 times
Top
User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Thin extrusion on one side of bed

Post by William » Thu Dec 26, 2019 9:28 am

:D Hi, If you are using a 0.4 nozzle,
Layer height is set to 80% of the nozzle.

I hope this can help you.
-Keep your mind and try to test it. :)
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Top
evant8950
Posts: 9
Joined: Thu Dec 26, 2019 2:56 am

Re: Thin extrusion on one side of bed

Post by evant8950 » Fri Dec 27, 2019 4:05 am

Thank you. Let me adjust my layer height and see what happens.
Top
Post Reply

Return to “Geeetech A10 Series”