A10M not run

Post Reply
AdrianCH
Posts: 2
Joined: Tue Jun 18, 2019 5:42 am

A10M not run

Post by AdrianCH » Thu Nov 28, 2019 6:25 am

I turn on the power supply and the display does not start.
Look at the board and I only have one of the LEDs on exactly 12 VB.

As I can contact the technical service, the machine has 4 months
Top
User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: A10M not run

Post by William » Thu Nov 28, 2019 9:25 am

Hi, If you turn on the printer normally, there will be three lights on the motherboard.
V3 三灯亮起的位置.jpg
V3 三灯亮起的位置.jpg (1.51 MiB) Viewed 25687 times
If not, you may need to contact your sales representative to replace the motherboard.
-Keep your mind and try to test it. :)
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Top
AdrianCH
Posts: 2
Joined: Tue Jun 18, 2019 5:42 am

Re: A10M not run

Post by AdrianCH » Thu Nov 28, 2019 4:51 pm

Thank you very much William, contacted the service and send me a replacement plate.

Very grateful to the service, Miss Angela
Top
User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: A10M not run

Post by William » Thu Nov 28, 2019 4:59 pm

:D
-Keep your mind and try to test it. :)
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Top
suhal
Posts: 7
Joined: Wed Apr 06, 2022 4:01 pm

Re: A10M not run

Post by suhal » Wed Apr 06, 2022 4:05 pm

Want to know if this is the right 3D printer for you. Let’s review the features and specs of the Geeetech A10M to find out..nulls clash
Top
Stehen
Posts: 7
Joined: Fri Jun 17, 2022 1:46 pm

Re: A10M not run

Post by Stehen » Sat Jun 25, 2022 1:51 am

AAmmmm!!! ModPapa what can be the cause of not lighting up the 5V light? Master Royale Infinity Download
Top
Post Reply

Return to “Bug report”