Are you can't find Geeetech i3 on Cura?
Don't worry
Refer to these:
------------------------------
--------------------------------------------------------------------------------------------------------------------------------------
Update:Thanks for @vert's suggestions.
1. We added the G29 for the start code
We added the "G1 Y230 F6000" for the end code（ 2019/1/7）
-----------------------------------------------------------------------------------------
2. We attached the PLA filament profile for Multi_mixer printer（2019/1/23）
-----------------------------------------------------------------------------------------
3. We set the default filament diameter to 1.75mm and it can work with Cura 4.0(2019/4/7)
-----------------------------------------------------------------------------------------
4.Thanks for @LisaE‘s suggestions.The profile updated.(2019.4.17)
-----------------------------------------------------------------------------------------
5. Deleted the "Heating gcode for nozzle/hotbed"in"start code".Added the meshes file.(2019.4.24)
1.Download Profile for Geeetech 3Dprinter Download the PLA filament profile for A10M
------------------------------
--------------------------------------------------------------------------------------------------------------------------------------
2. Unzip the zip file then you will get "resources"folder
- Cura-1.png (76.4 KiB) Viewed 35238 times
------------------------------------------------------------------------------------
3.Copy "resources" to the
Cura installation directory
Default:
C:\Program Files\Ultimaker Cura 4.0
- Cura-2.png (127.3 KiB) Viewed 35238 times
- Cura-3.png (127.9 KiB) Viewed 35238 times
- Cura-4.png (70.33 KiB) Viewed 35238 times
------------------------------------------------------------------------------------
3.Import the PLA filament profile for Geeetech A10M
- Cura-5.png (25.54 KiB) Viewed 35238 times
- Cura-6.png (61.65 KiB) Viewed 35238 times
4.Done!Enjoy it!
