Hello I've assembled two Geeetech I3 Pro B for a friend. The first one after assembling and started showed me "printer is ready" message with all status infos (temperatures etc.). The second one instead is showing me "Card is OK! Start Test!" and I can do nothing, no selection, and if i press button I hear a beeep. I tried to press reset on board but nothing. Why this different behaviour from the first printer? What should I do now?
Thanks
Message "Card is OK! Start Test!" on start
Re: Message "Card is OK! Start Test!" on start
You need to upload the fw to your printer then it will work.
It seems your printer doesn't has the fw.
Refer to it:
viewtopic.php?f=20&t=17046
It seems your printer doesn't has the fw.
Refer to it:
viewtopic.php?f=20&t=17046
-Keep your mind and try to test it. 
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!