A10M - Problems ahead
A10M - Problems ahead
Its dead again after getting a replacement after motherboard when bang now the thermistor is bouncing all over the place making the printer unusable until the replacement print head i have on order arrives from china (16th January according to ebay seller) under a few months old and this many problems I cant recommend this product to anyone (at moment)
Last edited by mj4178 on Mon Dec 24, 2018 5:22 am, edited 1 time in total.
Re: A10M - avoid this printer!
Reply to MR vert
Q. if you expect any 3d printer to just work out of the box you where mistaken.
A. I know that I had to do repairs when i got it and it had been working ok!
Q. if you find a broken part they will send you another under warranty.
A.Ha ha if your in china maybe and they dont claim warned or miss use and tech support on here is a joke!
Q.the problems you have are due to a lack of skill and your refusing to learn it is easier to blame everyone else.
A. (I would get banned if i put what i think of this comment) I have had a 3d printer for over 1 year which was working ok just never gave me the results i liked i saw two colour and desided to upgrade i would got back to old one but need printer to print a replacement braked that last one broke!
Q. 3d printing is inherently for tinkering if you expected push button = stuff, that's never going to happen.
A. I know that why do you think i own a copy of £150 printing software!
Q.i would also remind you that flaming like this is against the forum rules you are to contact a geeetech representative directly with your concerns.
perhaps you should present your problem in a logical and descriptive manor and someone here on the forums can suggest options.
A. They dont exist! (I will just take this to facebook and twitter then where customers are)
Q. fyi thermistors cost less then 1$ each on amazon you can get a pack of 5 heaters and thermistors for under 10$.
A. Yes why i am now having to drill out the screw that is holding it in
Q. if you expect any 3d printer to just work out of the box you where mistaken.
A. I know that I had to do repairs when i got it and it had been working ok!
Q. if you find a broken part they will send you another under warranty.
A.Ha ha if your in china maybe and they dont claim warned or miss use and tech support on here is a joke!
Q.the problems you have are due to a lack of skill and your refusing to learn it is easier to blame everyone else.
A. (I would get banned if i put what i think of this comment) I have had a 3d printer for over 1 year which was working ok just never gave me the results i liked i saw two colour and desided to upgrade i would got back to old one but need printer to print a replacement braked that last one broke!
Q. 3d printing is inherently for tinkering if you expected push button = stuff, that's never going to happen.
A. I know that why do you think i own a copy of £150 printing software!
Q.i would also remind you that flaming like this is against the forum rules you are to contact a geeetech representative directly with your concerns.
perhaps you should present your problem in a logical and descriptive manor and someone here on the forums can suggest options.
A. They dont exist! (I will just take this to facebook and twitter then where customers are)
Q. fyi thermistors cost less then 1$ each on amazon you can get a pack of 5 heaters and thermistors for under 10$.
A. Yes why i am now having to drill out the screw that is holding it in
Re: A10M - avoid this printer!
To admins if you want to delete this feel free!
Re: A10M - avoid this printer!
Welcome, gentlemen.
I see no reason to delete posts or topics.
Conversation is on a certain level, only this complaining is unnecessary.
I can say that GT printers require knowledge and some adjustments after purchase.
But it's good because you get the necessary knowledge faster.
Sometimes it can be tedious and require a lot of patience. But where else will you buy such cool equipment at such a low price?
Of course, you can always choose another brand - more expensive, and require from the manufacturer and his support thinking instead of you ...
No offense.
I see no reason to delete posts or topics.
Conversation is on a certain level, only this complaining is unnecessary.
I can say that GT printers require knowledge and some adjustments after purchase.
But it's good because you get the necessary knowledge faster.
Sometimes it can be tedious and require a lot of patience. But where else will you buy such cool equipment at such a low price?
Of course, you can always choose another brand - more expensive, and require from the manufacturer and his support thinking instead of you ...
No offense.
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.
Re: A10M - Problems ahead
Have amended title see if that makes people happier
I have ordered another make printer as A10M going to be offline for month so got a monoprice delta mini and so far for single colour prints (in small size area (Yes i know it hasnt got build volume of A10)) it has been doing better
I have ordered another make printer as A10M going to be offline for month so got a monoprice delta mini and so far for single colour prints (in small size area (Yes i know it hasnt got build volume of A10)) it has been doing better