A10M Mixing color

[robbyrossi]

Hello community,

I have bought a Geetech A10M but in "easy print" I not found a way to print with mixing color/dual extruding and not found A10M printer (also firmware upgrade).

There are a guide to print with mixing color with easy print and see A10M printer?

Please help me

Thanks in advance

Regards

[Akuma]

Sorry I don't know what "easy print" is. I would try going on YouTube. There are plenty of videos showing how to dual colour print with it. That's how I learned

[_kaktus_]

Hello.


This is a software of the GT brand, functionally similar to Repetier-Host and the like.

When you issue a T1 or T0 command while printing, the active extruder is switched.

In addition, check that your model has a function in the control panel that allows you to mix and / or switch the active extruder.

Adding commands I was talking about directly in the prepared Gcode script will switch extruder support. When you load two colors of filament into extruders, you will receive a two-color (or more) printout.